The meaning of CONFIG_USB in U-Boot is different from that in Linux.
As you see in drivers/usb/Kconfig of Linux, CONFIG_USB enables the
USB host controller support, while CONFIG_USB_SUPPORT is used to
enable the whole of the USB sub-system.
When I added CONFIG_USB into Kconfig by commit 6e7e9294d321 ("usb:
add basic USB configs in Kconfig"), I planned to follow the Linux's
convention, i.e. CONFIG_USB to enable/disable the USB host support.
Then, commit 68f7c5db2d1e ("usb: Generic USB Kconfig option, that
fits both host and gadget and comments") changed the logic of the
CONFIG_USB to point to the whole of the USB sub-system. As a result,
currently we do not have an option for USB host.
This commit adds CONFIG_USB_HOST, which will be useful to compile
in the USB host support code.
CONFIG_USB_HOST is not referenced at all, but strangely some boards
define it in board headers. I removed them because USB_HOST will be
selected in Kconfig going forward.
Signed-off-by: Masahiro Yamada <yamada.masah...@socionext.com>
---
Changes in v2: None
drivers/usb/host/Kconfig | 7 +++++++
include/configs/am43xx_evm.h | 1 -
include/configs/am57xx_evm.h | 1 -
include/configs/cm_t43.h | 1 -
include/configs/cm_t54.h | 1 -
include/configs/dra7xx_evm.h | 1 -
include/configs/duovero.h | 1 -
include/configs/omap4_panda.h | 1 -
include/configs/omap5_uevm.h | 1 -
9 files changed, 7 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 156dae4..02ae5cc 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -3,8 +3,12 @@
#
comment "USB Host Controller Drivers"
+config USB_HOST
+ bool
+
config USB_XHCI_HCD
bool "xHCI HCD (USB 3.0) support"
+ select USB_HOST
---help---
The eXtensible Host Controller Interface (xHCI) is standard for USB
3.0
"SuperSpeed" host controller hardware.
@@ -28,6 +32,7 @@ endif # USB_XHCI_HCD
config USB_EHCI_HCD
bool "EHCI HCD (USB 2.0) support"
+ select USB_HOST
---help---
The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
"high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
@@ -112,6 +117,7 @@ config USB_OHCI_GENERIC
bool "Support for generic OHCI USB controller"
depends on OF_CONTROL
depends on DM_USB
+ select USB_HOST
---help---
Enables support for generic OHCI controller.
@@ -119,6 +125,7 @@ endif # USB_OHCI_HCD
config USB_UHCI_HCD
bool "UHCI HCD (most Intel and VIA) support"
+ select USB_HOST
---help---
The Universal Host Controller Interface is a standard by Intel for
accessing the USB hardware in the PC (which is also called the USB
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 361704b..0467953 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -98,7 +98,6 @@
#if defined(CONFIG_SPL_USB_HOST_SUPPORT) || !defined(CONFIG_SPL_BUILD)
#define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1
-#define CONFIG_USB_HOST
#define CONFIG_USB_XHCI_OMAP
#define CONFIG_USB_STORAGE
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h
index 2db199d..c9dcfe5 100644
--- a/include/configs/am57xx_evm.h
+++ b/include/configs/am57xx_evm.h
@@ -63,7 +63,6 @@
#define CONFIG_SUPPORT_EMMC_BOOT
/* USB xHCI HOST */
-#define CONFIG_USB_HOST
#define CONFIG_USB_XHCI_OMAP
#define CONFIG_USB_STORAGE
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h
index 9bb975a..5d94f13 100644
--- a/include/configs/cm_t43.h
+++ b/include/configs/cm_t43.h
@@ -60,7 +60,6 @@
#define CONFIG_SYS_RX_ETH_BUFFER 64
/* USB support */
-#define CONFIG_USB_HOST
#define CONFIG_USB_XHCI_OMAP
#define CONFIG_USB_STORAGE
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
diff --git a/include/configs/cm_t54.h b/include/configs/cm_t54.h
index 68851ee..8e9444e 100644
--- a/include/configs/cm_t54.h
+++ b/include/configs/cm_t54.h
@@ -69,7 +69,6 @@
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
CONFIG_SYS_SCSI_MAX_LUN)
/* USB UHH support options */
-#define CONFIG_USB_HOST
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_OMAP
#define CONFIG_USB_STORAGE
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 0d51aeb..c8f1d5f 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -210,7 +210,6 @@
#define CONFIG_SUPPORT_EMMC_BOOT
/* USB xHCI HOST */
-#define CONFIG_USB_HOST
#define CONFIG_USB_XHCI_OMAP
#define CONFIG_USB_STORAGE
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
diff --git a/include/configs/duovero.h b/include/configs/duovero.h
index 98afe27..299c0d5 100644
--- a/include/configs/duovero.h
+++ b/include/configs/duovero.h
@@ -29,7 +29,6 @@
#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
/* USB UHH support options */
-#define CONFIG_USB_HOST
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_OMAP
#define CONFIG_USB_STORAGE
diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
index 0d62ccd..ffa22c3 100644
--- a/include/configs/omap4_panda.h
+++ b/include/configs/omap4_panda.h
@@ -17,7 +17,6 @@
*/
/* USB UHH support options */
-#define CONFIG_USB_HOST
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_OMAP
#define CONFIG_USB_STORAGE
diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
index 4ddc492..2bf955a 100644
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@@ -88,7 +88,6 @@
#define CONFIG_SYS_I2C_TCA642X_ADDR 0x22
/* USB UHH support options */
-#define CONFIG_USB_HOST
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_OMAP
#define CONFIG_USB_STORAGE
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
