Hi! Read carefullly your config file! I've working with same things (Gaisler+Leon3+Gcc-4.3.3) on board ML-402. My config compiles without problem, so i suggest that makefile is good.
2009/9/16 Kraitschy, Tobias <tobias.kraits...@siemens.com>: > Hi all, > > I`ve implemented Gaisler Research`s Leon3 SPARC core to a FPGA evaluation > board of Actel. Now I`m about to get U-Boot running. So I made up my own > board directory, added header files with my configuration-parameters etc. > just as discribed in the u-boot README. > The "make myboard_config" goes well, but "make all" fails with the following > message. > > make[1]: *** No rule to make target > `/u-boot-2009.08_build/cpu/leon3/start.S', needed by > `/u-boot-2009.08_build/cpu/leon3/start.o'. Stop. > > I´d like to add that I set "BUILD_DIR=`/u-boot-2009.08_build" and I am using > Gaisler`s Bare Cross Compiler with GCC 3.4.4. Searching the > mailing-list-archives brought no advice to me. I also tried to study the > Makefiles for half a week now, but I´m not familiar enought with it. > > Thanks for your help! > > Best regards, > > Tobias Kraitschy > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot > > -- С Уважением, Сергей. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
