Hi,
I use ubuntu 9.04 system.
The shell is bash version is : GNU bash, version 3.2.48(1)-release
(i486-pc-linux-gnu)
The make version is: GNU Make 3.81
The step I take to compile the u-boot is :
make smdk6400_config
make all
below is the some message from compiling:
arm-linux-objcopy --gap-fill=0xff -O binary
/root/u-boot-2009.06/nand_spl/u-boot-spl
/root/u-boot-2009.06/nand_spl/u-boot-spl.bin
arm-linux-objcopy --gap-fill=0xff --pad-to= -O binary
/root/u-boot-2009.06/nand_spl/u-boot-spl
/root/u-boot-2009.06/nand_spl/u-boot-spl-16k.bin
make[1]: Leaving directory
`/root/u-boot-2009.06/nand_spl/board/samsung/smdk6400'
cat nand_spl/u-boot-spl-16k.bin u-boot.bin > u-boot-nand.bin
list the files give out the result below:
-rwxr-xr-x 1 root root 2884 2009-09-16 23:32 u-boot-spl-16k.bin
-rwxr-xr-x 1 root root 2884 2009-09-16 23:32 u-boot-spl.bin
You can notice that the PAD_TO is empty during build, and the final size of the
two file is the same.
Do you think that is the difference of bash or make between yours and mine
cause the issue ?
-----Original Message-----
From: Minkyu Kang [mailto:proms...@gmail.com]
Sent: Wednesday, September 16, 2009 9:44 AM
To: Wolfgang Denk
Cc: Minkyu Kang; u-boot@lists.denx.de; sun peng
Subject: Re: [U-Boot] I found an error
Dear sun peng
2009/9/16 Wolfgang Denk <w...@denx.de>:
> Dear Minkyu Kang,
>
> In message <3fa5fd300909100724x18b2a8bdve0bd6e9fb7194...@mail.gmail.com> Sun
> Peng wrote:
>>
>> Recently I'm playing with u-boot and want it be able to boot from nand.
>> When I config u-boot to smdk6400, I found I can't get nand_spl with proper
>> size. It need to be pad to 4k to fit into the steping stone.
>> The final size of nand_spl is depend on the variable "PAD_TO":
>>
>> # PAD_TO used to generate a 4kByte binary needed for the
>> combined image
>> # -> PAD_TO = TEXT_BASE + 4096
>> PAD_TO := $(shell expr $$[$(TEXT_BASE) + 4096])
>> The lines above is in file:
>> u-boot-xxx/nand_spl//board/samsung/smdk6400/config.mk
>> Unfortunately the PAD_TO can not evaluate to the proper value when I run the
>> makefile.
>> I change the the line to below:
>> PAD_TO := $(shell expr $(TEXT_BASE) + 4096)
>> then the whole build works OK.
>>
>> Is there any body think this is an issue ?
>
> Could you please be so kind and have a look at this?
>
> Thanks in advance.
>
> Best regards,
>
> Wolfgang Denk
>
> --
> DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
> "IBM uses what I like to call the 'hole-in-the-ground technique' to
> destroy the competition..... IBM digs a big HOLE in the ground and
> covers it with leaves. It then puts a big POT OF GOLD nearby. Then it
> gives the call, 'Hey, look at all this gold, get over here fast.' As
> soon as the competitor approaches the pot, he falls into the pit"
> - John C. Dvorak
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
I saw correct PAD_TO value without modification.
ccache /opt/toolchains/arm-2008q3/bin/arm-none-linux-gnueabi-objcopy
--gap-fill=0xff --pad-to=4096 -O binary
/home/share/Work/u-boot-work/nand_spl/u-boot-spl
/home/share/Work/u-boot-work/nand_spl/u-boot-spl-16k.bin
and I've got 4Kbyte binary also.
-rwxr-xr-x 1 prom prom 4096 2009-09-16 10:21 u-boot-spl-16k.bin
I think there have no problem.
If it's not your problem, please explain in more detail.
Thanks.
Minkyu Kang
--
from. prom.
www.promsoft.net
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
