Hi Jaehoon, > -----Original Message----- > From: Jaehoon Chung [mailto:jh80.ch...@samsung.com] > Sent: 2016年7月21日 12:17 > To: Wenyou Yang <wenyou.y...@atmel.com>; U-Boot Mailing List <u- > b...@lists.denx.de> > Cc: Pantelis Antoniou <pa...@antoniou-consulting.com>; Andreas Bießmann > <andr...@biessmann.org>; Simon Glass <s...@chromium.org> > Subject: Re: [PATCH v7] mmc: atmel_sdhci: Convert to the driver model support > > Hi Wenyuo, > > On 07/20/2016 07:04 PM, Wenyou Yang wrote: > > Convert the driver to the driver model while retaining the existing > > legacy code. This allows the driver to support boards that have > > converted to driver model as well as those that have not. > > > > Signed-off-by: Wenyou Yang <wenyou.y...@atmel.com> > > Reviewed-by: Simon Glass <s...@chromium.org> > > --- > > > > Changes in v7: > > - Add support for using driver model for block devices and MMC operations. > > - Change clk_client.h -> clk.h to adapt to clk API conversion. > > > > Changes in v6: > > - Remove unnecessary white space. > > - Use sdhci_read(), instead of readl(). > > - Remove the local variables min_clk. > > > > Changes in v5: > > - Add Reviewed-by tag. > > > > Changes in v4: > > - Update the clk API based on [PATCH] clk: convert API to match > > reset/mailbox fstyle (http://patchwork.ozlabs.org/patch/625342/). > > - Remove check on dev_get_parent() return. > > - Fixed the return value, such as -ENODEV->-EINVAL. > > > > Changes in v3: > > - Remove the redundant log print. > > > > Changes in v2: > > - Add clock support, include enabling peripheral clock and > > generated clock. > > - Retain the existing legacy code to support boards which have not > > converted to driver model. > > > > drivers/mmc/Kconfig | 10 ++++ > > drivers/mmc/atmel_sdhci.c | 125 > ++++++++++++++++++++++++++++++++++++++++++++++ > > include/sdhci.h | 2 + > > 3 files changed, 137 insertions(+) > > > > diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index > > 79cf18f..49b325e 100644 > > --- a/drivers/mmc/Kconfig > > +++ b/drivers/mmc/Kconfig > > @@ -34,6 +34,16 @@ config MSM_SDHCI > > SD 3.0 specifications. Both SD and eMMC devices are supported. > > Card-detect gpios are not supported. > > > > +config ATMEL_SDHCI > > + bool "Atmel SDHCI controller support" > > + depends on DM_MMC && BLK && DM_MMC_OPS && ARCH_AT91 > > + help > > + This enables support for the Atmel SDHCI controller, which supports > > + the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD > > + Memory Card Specification V3.0, and the SDIO V3.0 specification. > > + It is compliant with the SD Host Controller Standard V3.0 > > + specification. > > + > > config ROCKCHIP_DWMMC > > bool "Rockchip SD/MMC controller support" > > depends on DM_MMC && OF_CONTROL > > diff --git a/drivers/mmc/atmel_sdhci.c b/drivers/mmc/atmel_sdhci.c > > index 24b68b6..977f6ef 100644 > > --- a/drivers/mmc/atmel_sdhci.c > > +++ b/drivers/mmc/atmel_sdhci.c > > @@ -6,12 +6,15 @@ > > */ > > > > #include <common.h> > > +#include <clk.h> > > +#include <dm.h> > > If it doesn't use DM_MMC, then doesn't it need to include dm.h? > > > #include <malloc.h> > > #include <sdhci.h> > > #include <asm/arch/clk.h> > > > > #define ATMEL_SDHC_MIN_FREQ 400000 > > > > +#ifndef CONFIG_DM_MMC > > int atmel_sdhci_init(void *regbase, u32 id) { > > struct sdhci_host *host; > > @@ -38,3 +41,125 @@ int atmel_sdhci_init(void *regbase, u32 id) > > > > return 0; > > } > > + > > +#else > > + > > +DECLARE_GLOBAL_DATA_PTR; > > + > > +struct atmel_sdhci_plat { > > + struct mmc_config cfg; > > + struct mmc mmc; > > +}; > > + > > +static int atmel_sdhci_probe(struct udevice *dev) { > > + struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); > > + struct atmel_sdhci_plat *plat = dev_get_platdata(dev); > > + struct sdhci_host *host = dev_get_priv(dev); > > + u32 max_clk; > > + u32 caps, caps_1; > > + u32 clk_base, clk_mul; > > + u32 gck_rate; > > + struct udevice *dev_clk; > > + struct clk clk; > > + int periph, ret; > > + > > + ret = clk_get_by_index(dev, 0, &clk); > > + if (ret) > > + return ret; > > + > > + periph = fdtdec_get_uint(gd->fdt_blob, clk.dev->of_offset, "reg", -1); > > + if (periph < 0) > > + return -EINVAL; > > periph is just used to pass to clk.id. it looks meaningless. > As i already mentioned, you can make more cleaner than now.
There is a litter difference from usual clock structure for Atmel clock driver. The periph value is got from a child node, then is assigned to its parent clock node. > > > + > > + dev_clk = dev_get_parent(clk.dev); > > + ret = clk_request(dev_clk, &clk); > > + if (ret) > > + return ret; > > + > > + clk.id = periph; > > + ret = clk_enable(&clk); > > + if (ret) > > + return ret; > > + > > + host->name = (char *)dev->name; > > Needs the type casting? Accepted. > > > + host->ioaddr = (void *)dev_get_addr(dev); > > + > > + host->quirks = 0; > > + host->version = sdhci_readw(host, SDHCI_HOST_VERSION); > > + > > + host->bus_width = fdtdec_get_int(gd->fdt_blob, dev->of_offset, > > + "bus-width", 4); > > + > > + caps = sdhci_readl(host, SDHCI_CAPABILITIES); > > + clk_base = (caps & SDHCI_CLOCK_V3_BASE_MASK) >> > SDHCI_CLOCK_BASE_SHIFT; > > + caps_1 = sdhci_readl(host, SDHCI_CAPABILITIES_1); > > + clk_mul = (caps_1 & SDHCI_CLOCK_MUL_MASK) >> > SDHCI_CLOCK_MUL_SHIFT; > > + gck_rate = clk_base * 1000000 * (clk_mul + 1); > > gck_rate can be over u32 boundary, doesn't? Accepted. > > > + > > + ret = clk_get_by_index(dev, 1, &clk); > > + if (ret) > > + return ret; > > It can reuse the above clock get sequence. > > If reuse this sequence, lines can be reduced. > > My suggestion is > > 1. Make atmel_sdhci_get_clk(..., int index), it should be returned "struct > clk" type. > > 2. Then the below sequence should be included in function, > > atmel_sdhci_get_clk(..., int index) { > > clk_get_by_index(dev, index, &clk); > ... > > return clk; > } > > How about? Good ideas, thanks a lot. > > Best Regards, > Jaehoon Chung > > > + > > + periph = fdtdec_get_uint(gd->fdt_blob, clk.dev->of_offset, "reg", -1); > > + if (periph < 0) > > + return -EINVAL; > > + > > + dev_clk = dev_get_parent(clk.dev); > > + ret = clk_request(dev_clk, &clk); > > + if (ret) > > + return ret; > > + > > + clk.id = periph; > > + ret = clk_set_rate(&clk, gck_rate); > > + if (ret) > > + return ret; > > + > > + max_clk = clk_get_rate(&clk); > > + if (!max_clk) > > + return -EINVAL; > > + > > + ret = sdhci_setup_cfg(&plat->cfg, dev->name, host->bus_width, > > + caps, max_clk, ATMEL_SDHC_MIN_FREQ, > > + host->version, host->quirks, 0); > > + if (ret) > > + return ret; > > + > > + host->mmc = &plat->mmc; > > + host->mmc->dev = dev; > > + host->mmc->priv = host; > > + upriv->mmc = host->mmc; > > + > > + clk_free(&clk); > > + > > + return sdhci_probe(dev); > > +} > > + > > +static int atmel_sdhci_bind(struct udevice *dev) { > > + struct atmel_sdhci_plat *plat = dev_get_platdata(dev); > > + int ret; > > + > > + ret = sdhci_bind(dev, &plat->mmc, &plat->cfg); > > + if (ret) > > + return ret; > > + > > + return 0; > > +} > > + > > +static const struct udevice_id atmel_sdhci_ids[] = { > > + { .compatible = "atmel,sama5d2-sdhci" }, > > + { } > > +}; > > + > > +U_BOOT_DRIVER(atmel_sdhci_drv) = { > > + .name = "atmel_sdhci", > > + .id = UCLASS_MMC, > > + .of_match = atmel_sdhci_ids, > > + .ops = &sdhci_ops, > > + .bind = atmel_sdhci_bind, > > + .probe = atmel_sdhci_probe, > > + .priv_auto_alloc_size = sizeof(struct sdhci_host), > > + .platdata_auto_alloc_size = sizeof(struct atmel_sdhci_plat), }; > > +#endif > > diff --git a/include/sdhci.h b/include/sdhci.h index c4d3b55..fdc0032 > > 100644 > > --- a/include/sdhci.h > > +++ b/include/sdhci.h > > @@ -166,6 +166,8 @@ > > #define SDHCI_CAN_64BIT 0x10000000 > > > > #define SDHCI_CAPABILITIES_1 0x44 > > +#define SDHCI_CLOCK_MUL_MASK 0x00FF0000 > > +#define SDHCI_CLOCK_MUL_SHIFT 16 > > > > #define SDHCI_MAX_CURRENT 0x48 > > > > Best Regards, Wenyou Yang _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot