＋Alexander Graf
On 2016年07月22日 21:49, Sandy Patterson wrote:
Ziyuan,
I retested the kernel loading. I'm using 3.14 kernel. I also tested
with linux-4.7-rc6. I still require both the cache reverts and
disabling efi_loader on u-boot/master and u-boot-rockchip/master. (see
below for testing parameters)
Hans,
I have been unable to boot an RK3288 rock2 square board since v2016.03
release. The kernel fails to start.
Before reverting I get this on my console:
Starting kernel ...
### ERROR ### Please RESET the board ###
Another possibly related problem which has similar effect without the
ERROR potion above is a call to invalidate_icache_all() from
efi_runtime.c. Commenting out this line or disabled CONFIG_EFI_LOADER
seems to allow the kernel to boot.
testing:
board: radxa rock2 square
kernel: 3.14 custom, and linux-4.7-rc6 - multi_v7_defconfig zImage
rk3288-radxa-rock.dtb
toolchain: gcc-linaro-5.3-2016.02-x86_64_arm-linux-gnueabi
loading from sd card - the actual loading seems fine though. I'm not
sure how emmc would change anything.
booting command for 4.7 (we use and care about 3.14, but i thought it
would be easier to show with 4.7-rc6. I get the same behavior with 3.14):
setenv bootargs root=/dev/mmcblk0p4
ext4load mmc 0:3 0x02000000 /zImage; ext4load mmc 0:3 0x01f00000
/rk3288-rock2-square.dtb
bootz 0x02000000 - 0x01f00000
u-boot/master: 95d52733036af7438a5285d729d53844ec48c63e
CONFIG_EFI_LOADER=n and cache reverts required to load kernel
*_high changes don't seem to be required anymore
u-boot-rockchip: 1781acd31b01225402167fbdb8fa97157cc269eb
CONFIG_EFI_LOADER=n and cache reverts required to load kernel
*_high changes don't seem to be required anymore
Sandy Patterson
On Thu, Jul 21, 2016 at 11:21 PM, Simon Glass <s...@chromium.org
<mailto:s...@chromium.org>> wrote:
+Hans, Tom
Hi Sandy,
On 15 July 2016 at 07:40, Sandy Patterson
<apatter...@sightlogix.com <mailto:apatter...@sightlogix.com>> wrote:
> Hi Simon,
>
> I think I screwed up submitting, and didn't cc the maintainers
for the
> reverts. I can resubmit and get patman to behave. What do you
suggest?
>
> I still think this is the best patch to getting rock2 to load
kernels again.
>
> I just retested with a patch specific to my kernel. I think 3.14
linux has
> some quirks in how it wants the dram setup, and I get
instability without
> some changes to the dram init. I don't have enough of a system
to test for
> this instability using the latest mainline kernel, so I left
that patch out.
>
> Ziyuan had an alternative fix for efi_loader, but it looks like
it may break
> efi_loader for others, and I don't know how to test the efi
functionality,
> so I think disabling for RK3288 is best. I think I should move the
> CONFIG_EFI_LOADER patch to somehow patching rk3288_common.h
instead (can I
> #undef config vars in that file?)
Yes please can you resend and cc the maintainers and original author.
Patman -t should do this automatically.
Also with the revert of Han's ARM patches, please can you describe the
problem so it is clear why we need to revert?
Regards,
Simon
[...]
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
