Greetings, Ive been busy trying to get any signs from my generated u-boot.bin. I started thinking it was caused by the memory setup and replicated the one I had used in blob (which works). Still got nothing and now Im looking for suggestions on where to proceed. Can I count on the serial drivers working? What process starts after the memory is setup?
Attached my current Setup.S: diff --git a/board/jornada/setup.S b/board/jornada/setup.S new file mode 100644 index 0000000..1c6e233 --- /dev/null +++ b/board/jornada/setup.S @@ -0,0 +1,226 @@ +/* + * Memory Setup stuff - taken from blob memsetup.S + * + * Copyright (C) 1999 2000 2001 Erik Mouw (j.a.k.m...@its.tudelft.nl) and + * Jan-Derk Bakker (j.d.bak...@its.tudelft.nl) + * 2004 (c) MontaVista Software, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include "config.h" +#include "version.h" + + +/*----------------------------------------------------------------------- + * Board defines: + */ + +#define MDCNFG 0x00 +#define MDCAS00 0x04 +#define MDCAS01 0x08 +#define MDCAS02 0x0C +#define MSC0 0x10 +#define MSC1 0x14 +#define MECR 0x18 +#define MDREFR 0x1C +#define MDCAS20 0x20 +#define MDCAS21 0x24 +#define MDCAS22 0x28 +#define MSC2 0x2C +#define SMCNFG 0x30 + +#define MDCNFG_BANK0_ENABLE (1 << 0) +#define MDCNFG_DTIM0_SDRAM (1 << 2) +#define MDCNFG_DWID0_32B (0 << 3) +#define MDCNFG_DRAC0(n_) (((n_) & 7) << 4) +#define MDCNFG_TRP0(n_) (((n_) & 0xF) << 8) +#define MDCNFG_TDL0(n_) (((n_) & 3) << 12) +#define MDCNFG_TWR0(n_) (((n_) & 3) << 14) +#define MSC_RT_ROMFLASH 0 +#define MSC_RBW32 (0 << 2) +#define MSC_RDF(n_) (((n_) & 0x1f) << 3) +#define MSC_RDN(n_) (((n_) & 0x1f) << 8) +#define MSC_RRR(n_) (((n_) & 0x07) << 13) +#define MSC_RT_VARLAT_345 1 +#define MDREFR_TRASR(n_) (n_ & (0x0000000f)) +#define MDREFR_DRI(n_) ((n_ & (0x00000fff)) << 4) +#define MDREFR_K0RUN (1 << 17) +#define MDREFR_K0DB2 (1 << 18) +#define MDREFR_K1RUN (1 << 21) +#define MDREFR_K1DB2 (1 << 22) +#define MDREFR_K2RUN (1 << 25) +#define MDREFR_K2DB2 (1 << 26) +#define MDREFR_SLFRSH (1 << 31) +#define MDREFR_E1PIN (1 << 20) +#define PSSR_DH 0x00000008 +#define PSSR 0x04 +#define PM_BASE 0x90020000 + +#define mdcnfg_1 (MDCNFG_BANK0_ENABLE|MDCNFG_DTIM0_SDRAM|MDCNFG_DWID0_32B|MDCNFG_DRAC0(6)|MDCNFG_TRP0(2)|MDCNFG_TDL0(3)|MDCNFG_TWR0(1)) +#define cs0_1 (MSC_RT_ROMFLASH|MSC_RBW32|MSC_RDF(15)|MSC_RDN(15)|MSC_RRR(2)) +#define cs1_1 (MSC_RT_ROMFLASH|MSC_RBW32|MSC_RDF(30)|MSC_RDN(31)|MSC_RRR(7)) +#define cs2_1 (MSC_RT_ROMFLASH|MSC_RBW32|MSC_RDF(30)|MSC_RDN(31)|MSC_RRR(7)) +#define cs3_1 (MSC_RT_ROMFLASH|MSC_RBW32|MSC_RDF(31)|MSC_RDN(31)|MSC_RRR(7)) +#define cs4_1 (MSC_RT_VARLAT_345|MSC_RBW32|MSC_RDF(11)|MSC_RDN(9)|MSC_RRR(1)) +#define cs5_1 (MSC_RT_VARLAT_345|MSC_RBW32|MSC_RDF(3)|MSC_RDN(0)|MSC_RRR(1)) +#define msc0_1 (cs0_1|(cs1_1 << 16)) +#define msc1_1 (cs2_1|(cs3_1 << 16)) +#define msc2_1 (cs4_1|(cs5_1 << 16)) + + +/*----------------------------------------------------------------------- + * Setup parameters for the board: + */ + + +MEM_BASE: .long 0xa0000000 +MEM_START: .long 0xc0000000 +PWR_BASE: .word PM_BASE + +/* calculated from old blob bootloader */ +MEMORY_CONFIG: + .long mdcnfg_1 /* mdcnfg 0x00007265 */ + .long 0x5555557f /* mdcas00 0x5555557f */ + .long 0x55555555 /* mdcas01 0x55555555 */ + .long 0x55555555 /* mdcas02 0x55555555 */ + .long msc0_1 /* msc0 0xfff04f78 */ + .long msc1_1 /* msc1 0xfff8fff0 */ + .long 0x98c698c6 /* mecr 0x98c698c6 */ + .long 0xdeadbeef /* mdrefr 0x04340327 */ + .long 0xd1284142 /* mdcas20 0xd1284142 */ + .long 0x72249529 /* mdcas21 0x72249529 */ + .long 0x78414351 /* mdcas22 0x78414351 */ + .long msc2_1 /* msc2 0x201d2959 */ + .long 0x00000000 /* smcnfg 0x00000000 */ + +.globl lowlevel_init +lowlevel_init: + mov r5, lr + + /* Setting up the memory and stuff */ + ldr r0, MEM_BASE + adr r1, MEMORY_CONFIG + + ldr r2, [r1, #MDCNFG] + str r2, [r0, #MDCNFG] + + ldr r2, [r1, #MDCAS00] + str r2, [r0, #MDCAS00] + + ldr r2, [r1, #MDCAS01] + str r2, [r0, #MDCAS01] + + ldr r2, [r1, #MDCAS02] + str r2, [r0, #MDCAS02] + + ldr r2, [r1, #MDCAS20] + str r2, [r0, #MDCAS20] + + ldr r2, [r1, #MDCAS21] + str r2, [r0, #MDCAS21] + + ldr r2, [r1, #MDCAS22] + str r2, [r0, #MDCAS22] + + /* clear kxDB2 */ + ldr r2, [r0, #MDREFR] + bic r2, r2, #MDREFR_K0DB2 + bic r2, r2, #MDREFR_K1DB2 + bic r2, r2, #MDREFR_K2DB2 + str r2, [r0, #MDREFR] + + /* set TRASR and DRI, KXDB2 */ + ldr r2, [r0, #MDREFR] + orr r2, r2, #MDREFR_TRASR(7) + + mov r4, #0x2000 +spin: subs r4, r4, #1 + bne spin + + ldr r1, PWR_BASE + mov r2, #PSSR_DH + str r2, [r1, #PSSR] + + /* clear KxDB2 */ + ldr r2, [r0, #MDREFR] + bic r2, r2, #MDREFR_K0DB2 + bic r2, r2, #MDREFR_K1DB2 + bic r2, r2, #MDREFR_K2DB2 + str r2, [r0, #MDREFR] + + /* set TRASR and DRI, KxDB2 */ + ldr r2, [r0, #MDREFR] + orr r2, r2, #MDREFR_TRASR(7) + orr r2, r2, #MDREFR_DRI(12) + orr r2, r2, #MDREFR_K0DB2 + orr r2, r2, #MDREFR_K1DB2 + orr r2, r2, #MDREFR_K2DB2 + str r2, [r0, #MDREFR] + + /* set KxRUN */ + ldr r2, [r0, #MDREFR] + orr r2, r2, #MDREFR_K0RUN + orr r2, r2, #MDREFR_K1RUN + orr r2, r2, #MDREFR_K2RUN + str r2, [r0, #MDREFR] + + /* clear SLFRSH */ + ldr r2, [r0, #MDREFR] + bic r2, r2, #MDREFR_SLFRSH + str r2, [r0, #MDREFR] + + /* toggle E1PIN (set -> clear) */ + ldr r2, [r0, #MDREFR] + orr r2, r2, #MDREFR_E1PIN + str r2, [r0, #MDREFR] + + /* Load something to activate bank */ + ldr r1, MEM_START +.rept 8 + ldr r0, [r1] +.endr + + ldr r0, MEM_BASE + adr r1, MEMORY_CONFIG + + /* Enable SDRAM banks */ + ldr r2, [r0, #MDCNFG] + orr r2, r2, #0x00000003 + orr r2, r2, #0x00030000 + str r2, [r0, #MDCNFG] + + ldr r2, [r1, #MSC0] + str r2, [r0, #MSC0] + + ldr r2, [r1, #MSC1] + str r2, [r0, #MSC1] + + ldr r2, [r1, #MSC2] + str r2, [r0, #MSC2] + + ldr r2, [r1, #SMCNFG] + str r2, [r0, #SMCNFG] + + ldr r2, [r1, #MECR] + str r2, [r0, #MECR] + + /* All done... */ + mov pc, r5 -- Kristoffer Ericson <kristoffer.eric...@gmail.com> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
