When using SPI driver model, it will get the values from DT. So there is no need to set CONFIG_ENV_SPI_MAX_HZ and CONFIG_ENV_SPI_MODE any more.
Signed-off-by: Gong Qianyu <qianyu.g...@nxp.com> --- include/configs/ls1012a_common.h | 2 -- include/configs/ls1043a_common.h | 2 -- 2 files changed, 4 deletions(-) diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h index fba2fac..1602f09 100644 --- a/include/configs/ls1012a_common.h +++ b/include/configs/ls1012a_common.h @@ -52,8 +52,6 @@ #define CONFIG_SYS_FMAN_FW_ADDR 0x400d0000 #define CONFIG_ENV_SPI_BUS 0 #define CONFIG_ENV_SPI_CS 0 -#define CONFIG_ENV_SPI_MAX_HZ 1000000 -#define CONFIG_ENV_SPI_MODE 0x03 #define CONFIG_SPI_FLASH_SPANSION #define CONFIG_FSL_SPI_INTERFACE #define CONFIG_SF_DATAFLASH diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index b0d4a8d..028f7d9 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -222,8 +222,6 @@ #define CONFIG_SYS_FMAN_FW_ADDR 0x400d0000 #define CONFIG_ENV_SPI_BUS 0 #define CONFIG_ENV_SPI_CS 0 -#define CONFIG_ENV_SPI_MAX_HZ 1000000 -#define CONFIG_ENV_SPI_MODE 0x03 #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR /* FMan fireware Pre-load address */ -- 2.1.0.27.g96db324 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
