Joakim Tjernlund wrote: > Some boards need a higher DFSR value than the spec currently > recommends so give these boards the means to define there own.
If you're going to do this, then you need to also define CONFIG_FSL_I2C_CUSTOM_FSR and CONFIG_FSL_I2C_CUSTOM_SPEED, and disable the code that lets you change the speed. Otherwise, the code will have no idea what speed the bus is really running at. -- Timur Tabi Linux kernel developer at Freescale _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
