On Thu, Jun 23, 2016 at 2:58 PM, Lad, Prabhakar <prabhakar.cse...@gmail.com> wrote: > During spi transfer, for example: > sspi 1:1.0 8 ff > > the rx_len values will be: > rx_len = 0 > rx_len = 4294967295 > > This caused a busy looping during xfer, this patch fixes it > by adding a check while reading the rx fifo > Gentle ping..
Cheers, --Prabhakar Lad _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
