Hi Kever, Am Freitag, 15. Juli 2016, 16:42:08 schrieb Kever Yang: > This patchset add support for rk3399 with ATF based on > Rockchip miniloader as secondary bootloader instead of > u-boot SPL. > > Rockchip miniloader init the DRAM and load the ATF and > u-boot to runing address, and then jump to ATF, ATM > do some init and switch to EL2/EL1 mode before jump to > next loader which is u-boot here. > > Pls reference board/rockchip/evb_rk3399/README to setup > the board. > > Will migrate to SPL once its ready for ATF. > > This patch set is based on below patch: > "board: move all the rockchip board in one folder" > > This patch set has been test on rk3399 evb board.
just for my own little board-farm, for the rk3368 the bringup should be similar, right? > Changes in v3: > Rebase on patch from Andreas: > [PATCH] rockchip: Exclude rk_timer for ARM64 > [PATCH] rockchip: Clean up CPU selection > > Changes in v2: > fix description error on board Kconfig > fix a binary path error > > Kever Yang (5): > dts: add support for rkchichip rk3399 soc > ARM64: rockchip: add support for rk3399 SoC based evb-board > config: add config file for evb-rk3399 > mmc: rockchip: add SDHCI driver support for rockchip soc > ARM64: evb-rk3399: add a README for this board setup somehow this last patch never makes it to the lists in all 3 versions till now. Heiko _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
