From: Stefan Agner <[email protected]> This patchset adds support for the Toradex i.MX 7Solo and 7Dual based computer on modules Colibri iMX7S/iMX7D.
It also brings several smaller i.MX 7 related fixes/cleanups. Changes since v1: - Dropped Ricoh RN5T567 PMIC support (for now) - Use CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG for runtime variables - Convert USB OTG Power Pin Polarity to Kconfig - Use gpio_request in lcd_setup Stefan Agner (9): dm: imx: serial: Support DTE mode when using driver model usb: move CONFIG_USB_EHCI_MX7 to Kconfig usb: ehci-mx6: configure power polarity in usb_power_config usb: ehci-mx6: introduce config for high active power pin mx7: set soc environment according to exact SoC type mx7_common: Put display board info config into board file mx7_common: use Kconfig for ARMv7 non-secure mode imx_watchdog: add weak attribute to reset_cpu function colibri_imx7: add Colibri iMX7S/iMX7D module support arch/arm/cpu/armv7/mx7/Kconfig | 9 + arch/arm/cpu/armv7/mx7/soc.c | 14 + board/toradex/colibri_imx7/Kconfig | 12 + board/toradex/colibri_imx7/MAINTAINERS | 6 + board/toradex/colibri_imx7/Makefile | 6 + board/toradex/colibri_imx7/colibri_imx7.c | 420 ++++++++++++++++++++++++++++++ board/toradex/colibri_imx7/imximage.cfg | 150 +++++++++++ configs/colibri_imx7_defconfig | 40 +++ configs/mx7dsabresd_defconfig | 3 + configs/warp7_defconfig | 4 + drivers/serial/serial_mxc.c | 9 +- drivers/usb/host/Kconfig | 16 ++ drivers/usb/host/ehci-mx6.c | 14 +- drivers/watchdog/imx_watchdog.c | 2 +- include/configs/colibri_imx7.h | 248 ++++++++++++++++++ include/configs/mx7_common.h | 10 +- include/configs/mx7dsabresd.h | 4 +- include/configs/warp7.h | 4 +- include/dm/platform_data/serial_mxc.h | 1 + 19 files changed, 953 insertions(+), 19 deletions(-) create mode 100644 board/toradex/colibri_imx7/Kconfig create mode 100644 board/toradex/colibri_imx7/MAINTAINERS create mode 100644 board/toradex/colibri_imx7/Makefile create mode 100644 board/toradex/colibri_imx7/colibri_imx7.c create mode 100644 board/toradex/colibri_imx7/imximage.cfg create mode 100644 configs/colibri_imx7_defconfig create mode 100644 include/configs/colibri_imx7.h -- 2.9.0 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
