The patch-set does the following: 1. Enable SECURE BOOT framework in SPL for powerpc/mpc85xx and arm/layerscape platform. 2. Add NAND SECURE BOOT support for powerpc/mpc85xx T104x platform.
Changes PATCH v5->PATCH v6: Added README for SECURE BOOT support in SPL framework. Also incorporated review comments regarding comment style. Also patch [1] has been accepted in upstream, so no dependency. Changes PATCH v4->PATCH v5: Check for def CONFIG_SPL_DM and ndef CONFIG_SPL_FRAMEWORK instead of def CONFIG_DM macro to include call to dm_init_and_scan(). As dm_init_and_scan() is called as part of common SPL framework, so no need to call it again but in case of powerpc platforms which currently do not use common SPL framework, so need to include this function call here. Changes PATCH v3->PATCH v4: Generic changes in lib, drivers, common Makefiles removed from this patchset. Rebased this patchset on top of patch [1], so this patchset is dependent on patch [1]. Changes PATCH v2->PATCH v3: Patches rebased Changes PATCH->PATCH v2: Patches rebased [1]https://patchwork.ozlabs.org/patch/627664/ Sumit Garg (3): powerpc/mpc85xx: SECURE BOOT- Enable chain of trust in SPL powerpc/mpc85xx: T104x: Add nand secure boot target doc: SPL: Add README for secure boot support arch/powerpc/cpu/mpc85xx/cpu_init.c | 4 +- arch/powerpc/cpu/mpc85xx/start.S | 12 ++++-- arch/powerpc/cpu/mpc8xxx/fsl_pamu.c | 8 ++++ arch/powerpc/cpu/mpc8xxx/pamu_table.c | 8 ++++ arch/powerpc/include/asm/fsl_secure_boot.h | 41 ++++++++++++++++++- board/freescale/common/fsl_chain_of_trust.c | 56 ++++++++++++++++++++++++++ board/freescale/t104xrdb/t104x_pbi_sb.cfg | 38 +++++++++++++++++ board/freescale/t104xrdb/tlb.c | 15 ++++++- configs/T1042RDB_PI_NAND_SECURE_BOOT_defconfig | 30 ++++++++++++++ doc/SPL/README.spl-secure-boot | 18 +++++++++ drivers/crypto/fsl/jr.c | 17 ++++++++ drivers/mtd/nand/fsl_ifc_spl.c | 24 +++++++++++ include/configs/T104xRDB.h | 29 ++++++++++++- include/fsl_validate.h | 7 ++++ 14 files changed, 298 insertions(+), 9 deletions(-) create mode 100644 board/freescale/t104xrdb/t104x_pbi_sb.cfg create mode 100644 configs/T1042RDB_PI_NAND_SECURE_BOOT_defconfig create mode 100644 doc/SPL/README.spl-secure-boot -- 1.8.1.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
