+Tom Hi,
On 19 June 2016 at 20:59, Kever Yang <kever.y...@rock-chips.com> wrote: > Hi U-boot Maintainers, > > I want to upstream a new SoC named RK3399 from Rockchip which is > AARCH64/ARMv8, we need to support Arm Trust Firmware base on U-boot. > > Right now we are using a miniloader(just like SPL in U-boot) to load > ATF/U-boot, > and PC jump from miniloader to ATF and then to U-boot(with CPU change to EL2 > mode or nsEL1), > then U-boot load kernel/rootfs as usual. > > The ATF support for RK3399 has already upstream > Could you give your opinion on how to support ATF on U-boot upstream? To follow up on this, I think we need a better solution for building firmware images. I'm going to look at writing a tool to handle this. I hope to have some patches out by the end of July. > When I asked Simon Glass offline, he suggest if we can build ATF as part of > the > U-boot build process, perhaps with a script in U-boot tree, > > Perhaps something like: > > make rk3399_board_defconfig > make > ./scripts/build-atf-image rk3399_board > ^^ new script > > In any case, a good README would help. > > > Thanks, > - Kever > > Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
