On 5 July 2016 at 04:06, Ziyuan Xu <xzy...@rock-chips.com> wrote:
> evb-3288 board RK3288-based development board with 2 USB ports, HDMI,
> VGA, micro-SD card, audio, WiFi and Gigabit Ethernet. It also includes
> on-board 8G eMMC and 2GB of SDRAM. Expansion connector provide access to
> display pins, I2C, SPI, UART and GPIOs. This add some basic files
> required to allow the board to output serial messaged and can run
> command(mmc info etc).
>
> evb-rk3288 also supports booting from eMMC or SD card, the default is eMMC.
>
> Signed-off-by: Ziyuan Xu <xzy...@rock-chips.com>
>
> ---
>
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/rk3288-evb.dts | 59 +++++
> arch/arm/dts/rk3288-evb.dtsi | 379
> ++++++++++++++++++++++++++++++
> arch/arm/mach-rockchip/rk3288-board-spl.c | 4 +-
> arch/arm/mach-rockchip/rk3288/Kconfig | 10 +
> board/evb-rk3288/evb-rk3288/Kconfig | 15 ++
> board/evb-rk3288/evb-rk3288/MAINTAINERS | 6 +
> board/evb-rk3288/evb-rk3288/Makefile | 7 +
> board/evb-rk3288/evb-rk3288/evb-rk3288.c | 15 ++
> configs/evb-rk3288_defconfig | 67 ++++++
> doc/README.rockchip | 3 +-
> include/configs/evb-rk3288.h | 26 ++
> 12 files changed, 590 insertions(+), 2 deletions(-)
> create mode 100644 arch/arm/dts/rk3288-evb.dts
> create mode 100644 arch/arm/dts/rk3288-evb.dtsi
> create mode 100644 board/evb-rk3288/evb-rk3288/Kconfig
> create mode 100644 board/evb-rk3288/evb-rk3288/MAINTAINERS
> create mode 100644 board/evb-rk3288/evb-rk3288/Makefile
> create mode 100644 board/evb-rk3288/evb-rk3288/evb-rk3288.c
> create mode 100644 configs/evb-rk3288_defconfig
> create mode 100644 include/configs/evb-rk3288.h
>
Reviewed-by: Simon Glass <s...@chromium.org>
small nit below.
[snip]
> diff --git a/board/evb-rk3288/evb-rk3288/evb-rk3288.c
> b/board/evb-rk3288/evb-rk3288/evb-rk3288.c
> new file mode 100644
> index 0000000..a82f0ae
> --- /dev/null
> +++ b/board/evb-rk3288/evb-rk3288/evb-rk3288.c
> @@ -0,0 +1,15 @@
> +/*
> + * (C) Copyright 2016 Rockchip Electronics Co., Ltd
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <spl.h>
> +
> +void board_boot_order(u32 *spl_boot_list)
> +{
> + /* eMMC prior to sdcard. */
nit: Can you drop the .?
> + spl_boot_list[0] = BOOT_DEVICE_MMC2;
> + spl_boot_list[1] = BOOT_DEVICE_MMC1;
> +}
snip]
Regards,
Simon
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
