On Wed, Jun 22, 2016 at 07:17:53PM +0300, Igor Grinberg wrote:
> On 06/19/2016 06:44 PM, Christopher Spinrath wrote:
> > The cm-fx6 module has an on-board st,m25p compatible spi flash chip
> > used for u-boot (binary & environment). Overwrite the partitions in
> > the device tree by the partition table provided in the mtdparts
> > environment variable, if it is set.
> >
> > This allows to specify a kernel independent partitioning in the
> > environment and provides a convient way for the user to adapt the
> > partition table.
> >
> > Signed-off-by: Christopher Spinrath <christopher.spinr...@rwth-aachen.de>
> > ---
> > board/compulab/cm_fx6/cm_fx6.c | 16 +++++++++++++++-
> > 1 file changed, 15 insertions(+), 1 deletion(-)
> >
> > diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c
> > index 712057a..81a7ae2 100644
> > --- a/board/compulab/cm_fx6/cm_fx6.c
> > +++ b/board/compulab/cm_fx6/cm_fx6.c
>
> [...]
>
> > +#ifdef CONFIG_FDT_FIXUP_PARTITIONS
> > +struct node_info nodes[] = {
> > + { "st,m25p", MTD_DEV_TYPE_NOR, },
>
> Nikita, is this enough for all flashes we assemble on cm-fx6?
Yes, CM-FX6 is using M25PX16 and SST25VF016B, both of which are
supported by the m25p80.c driver. However, on the mainline branch
I don't see "m25p" in the list of device ids, and IIRC the request
is to favor "jedec,spi-nor" as compatible string over device specific
ones.
>
> > +};
> > +#endif
> > +
>
> [...]
>
> --
> Regards,
> Igor.
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
