On Thursday 10 September 2009 21:01:57 dbrazeau wrote: > I'm trying to get my ppc440spe (Katmai) board to initialize in PCI adapter > mode. I was hoping that someone could give me some pointers on what > changes I need in the katmai config file, i.e. do I need to define > CONFIG_SYS_PCI_MASTER_INIT. Also I noticed that some ppc4xx have > PCI_HOST_ADAPTER defined, but this is not defined in the Katmai config > file. Should I define it and define CONFIG_PCI_HOST to it? Any comments > are greatly appreciated. Thanks.
I don't know of any 440SPe based board used in PCI adapter mode. But you could probably check the esd PMC440 board. This is a PPC440EPx based PMC module which can be configured/built either as PCI host or as PCI adapter. Cheers, Stefan -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: off...@denx.de _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
