Align the name of the defconfig file for high-security (HS) device variants from the AM43xx family of SoCs with the corresponding names used for the general purpose devices. This allows for easier cross-association of those files and also provides room to grow from an HS device part number perspective.
Signed-off-by: Andreas Dannenberg <dannenb...@ti.com> Cc: Madan Srinivas <mad...@ti.com> --- While renaming files is always a tricky thing due to possible side effects in this case there is likely virtually no user of this defconfig file yet as it is rather new and the HS devices are not widely available in the first place. Hence, go ahead and make this alignment rather sooner than later. configs/am437x_hs_evm_defconfig | 59 ----------------------------------------- configs/am43xx_hs_evm_defconfig | 59 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 59 insertions(+), 59 deletions(-) delete mode 100644 configs/am437x_hs_evm_defconfig create mode 100644 configs/am43xx_hs_evm_defconfig diff --git a/configs/am437x_hs_evm_defconfig b/configs/am437x_hs_evm_defconfig deleted file mode 100644 index 4856a19..0000000 --- a/configs/am437x_hs_evm_defconfig +++ /dev/null @@ -1,59 +0,0 @@ -CONFIG_ARM=y -CONFIG_AM43XX=y -CONFIG_TI_SECURE_DEVICE=y -CONFIG_TARGET_AM43XX_EVM=y -CONFIG_DM_SERIAL=y -CONFIG_DM_GPIO=y -CONFIG_SPL_STACK_R_ADDR=0x82000000 -# Device tree file can be same on HS evm -CONFIG_DEFAULT_DEVICE_TREE="am437x-gp-evm" -CONFIG_SPL=y -CONFIG_ISW_ENTRY_ADDR=0x40302ae0 -CONFIG_SPL_STACK_R=y -CONFIG_FIT=y -CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1, NAND" -CONFIG_SPL_LOAD_FIT=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y -# CONFIG_CMD_IMLS is not set -CONFIG_CMD_ASKENV=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y -CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y -CONFIG_OF_CONTROL=y -CONFIG_OF_LIST="am437x-gp-evm" -CONFIG_DM=y -CONFIG_DM_MMC=y -CONFIG_SPI_FLASH=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SYS_NS16550=y -CONFIG_TI_QSPI=y -CONFIG_TIMER=y -CONFIG_OMAP_TIMER=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_USB_DWC3=y -CONFIG_USB_DWC3_GADGET=y -CONFIG_USB_DWC3_OMAP=y -CONFIG_USB_DWC3_PHY_OMAP=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_G_DNL_MANUFACTURER="Texas Instruments" -CONFIG_G_DNL_VENDOR_NUM=0x0403 -CONFIG_G_DNL_PRODUCT_NUM=0xbd00 -CONFIG_SPL_OF_LIBFDT=y diff --git a/configs/am43xx_hs_evm_defconfig b/configs/am43xx_hs_evm_defconfig new file mode 100644 index 0000000..4856a19 --- /dev/null +++ b/configs/am43xx_hs_evm_defconfig @@ -0,0 +1,59 @@ +CONFIG_ARM=y +CONFIG_AM43XX=y +CONFIG_TI_SECURE_DEVICE=y +CONFIG_TARGET_AM43XX_EVM=y +CONFIG_DM_SERIAL=y +CONFIG_DM_GPIO=y +CONFIG_SPL_STACK_R_ADDR=0x82000000 +# Device tree file can be same on HS evm +CONFIG_DEFAULT_DEVICE_TREE="am437x-gp-evm" +CONFIG_SPL=y +CONFIG_ISW_ENTRY_ADDR=0x40302ae0 +CONFIG_SPL_STACK_R=y +CONFIG_FIT=y +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1, NAND" +CONFIG_SPL_LOAD_FIT=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y +# CONFIG_CMD_IMLS is not set +CONFIG_CMD_ASKENV=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_SPI=y +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y +CONFIG_CMD_DFU=y +CONFIG_CMD_GPIO=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_OF_CONTROL=y +CONFIG_OF_LIST="am437x-gp-evm" +CONFIG_DM=y +CONFIG_DM_MMC=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SYS_NS16550=y +CONFIG_TI_QSPI=y +CONFIG_TIMER=y +CONFIG_OMAP_TIMER=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GADGET=y +CONFIG_USB_DWC3_OMAP=y +CONFIG_USB_DWC3_PHY_OMAP=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_G_DNL_MANUFACTURER="Texas Instruments" +CONFIG_G_DNL_VENDOR_NUM=0x0403 +CONFIG_G_DNL_PRODUCT_NUM=0xbd00 +CONFIG_SPL_OF_LIBFDT=y -- 2.6.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
