From: Benjamin Tietz <benja...@micronet24.de>
This patch adds the DTS configuration files needed for the
STM32F429-Discovery board, as they can be found in a current
Linux Kernel.
---
arch/arm/dts/Makefile | 2
arch/arm/dts/armv7-m.dtsi | 24 +++++
arch/arm/dts/stm32429i-eval.dts | 75 +++++++++++++++
arch/arm/dts/stm32f429-disco.dts | 75 +++++++++++++++
arch/arm/dts/stm32f429.dtsi | 190 ++++++++++++++++++++++++++++++++++++++
5 files changed, 366 insertions(+)
create mode 100644 arch/arm/dts/armv7-m.dtsi
create mode 100644 arch/arm/dts/stm32429i-eval.dts
create mode 100644 arch/arm/dts/stm32f429-disco.dts
create mode 100644 arch/arm/dts/stm32f429.dtsi
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index a827613..ff5fe03 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -103,6 +103,8 @@ dtb-$(CONFIG_AM43XX) += am437x-gp-evm.dtb am437x-sk-evm.dtb
\
am437x-idk-evm.dtb
dtb-$(CONFIG_THUNDERX) += thunderx-88xx.dtb
+dtb-$(CONFIG_STM32F4) += stm32f429-disco.dtb
+
dtb-$(CONFIG_ARCH_SOCFPGA) += \
socfpga_arria5_socdk.dtb \
socfpga_cyclone5_mcvevk.dtb \
diff --git a/arch/arm/dts/armv7-m.dtsi b/arch/arm/dts/armv7-m.dtsi
new file mode 100644
index 0000000..b1ad7cf
--- /dev/null
+++ b/arch/arm/dts/armv7-m.dtsi
@@ -0,0 +1,24 @@
+#include "skeleton.dtsi"
+
+/ {
+ nvic: nv-interrupt-controller {
+ compatible = "arm,armv7m-nvic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xe000e100 0xc00>;
+ };
+
+ systick: timer@e000e010 {
+ compatible = "arm,armv7m-systick";
+ reg = <0xe000e010 0x10>;
+ status = "disabled";
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&nvic>;
+ ranges;
+ };
+};
diff --git a/arch/arm/dts/stm32429i-eval.dts b/arch/arm/dts/stm32429i-eval.dts
new file mode 100644
index 0000000..6964fc9
--- /dev/null
+++ b/arch/arm/dts/stm32429i-eval.dts
@@ -0,0 +1,75 @@
+/*
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.st...@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32f429.dtsi"
+
+/ {
+ model = "STMicroelectronics STM32429i-EVAL board";
+ compatible = "st,stm32429i-eval", "st,stm32f429";
+
+ chosen {
+ bootargs = "root=/dev/ram rdinit=/linuxrc";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0xc0000000 0x2000000>;
+ };
+
+ aliases {
+ serial0 = &usart1;
+ };
+};
+
+&clk_hse {
+ clock-frequency = <25000000>;
+};
+
+&usart1 {
+ status = "okay";
+};
diff --git a/arch/arm/dts/stm32f429-disco.dts b/arch/arm/dts/stm32f429-disco.dts
new file mode 100644
index 0000000..2bae81c
--- /dev/null
+++ b/arch/arm/dts/stm32f429-disco.dts
@@ -0,0 +1,75 @@
+/*
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.st...@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32f429.dtsi"
+
+/ {
+ model = "STMicroelectronics STM32F429i-DISCO board";
+ compatible = "st,stm32f429i-disco", "st,stm32f429";
+
+ chosen {
+ bootargs = "root=/dev/ram";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0x90000000 0x800000>;
+ };
+
+ aliases {
+ serial0 = &usart1;
+ };
+};
+
+&clk_hse {
+ clock-frequency = <8000000>;
+};
+
+&usart1 {
+ status = "okay";
+};
diff --git a/arch/arm/dts/stm32f429.dtsi b/arch/arm/dts/stm32f429.dtsi
new file mode 100644
index 0000000..5e1e234
--- /dev/null
+++ b/arch/arm/dts/stm32f429.dtsi
@@ -0,0 +1,190 @@
+/*
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.st...@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "armv7-m.dtsi"
+
+/ {
+ clocks {
+ clk_hse: clk-hse {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+ };
+
+ soc {
+ timer2: timer@40000000 {
+ compatible = "st,stm32-timer";
+ reg = <0x40000000 0x400>;
+ interrupts = <28>;
+ clocks = <&rcc 0 128>;
+ status = "disabled";
+ };
+
+ timer3: timer@40000400 {
+ compatible = "st,stm32-timer";
+ reg = <0x40000400 0x400>;
+ interrupts = <29>;
+ clocks = <&rcc 0 129>;
+ status = "disabled";
+ };
+
+ timer4: timer@40000800 {
+ compatible = "st,stm32-timer";
+ reg = <0x40000800 0x400>;
+ interrupts = <30>;
+ clocks = <&rcc 0 130>;
+ status = "disabled";
+ };
+
+ timer5: timer@40000c00 {
+ compatible = "st,stm32-timer";
+ reg = <0x40000c00 0x400>;
+ interrupts = <50>;
+ clocks = <&rcc 0 131>;
+ };
+
+ timer6: timer@40001000 {
+ compatible = "st,stm32-timer";
+ reg = <0x40001000 0x400>;
+ interrupts = <54>;
+ clocks = <&rcc 0 132>;
+ status = "disabled";
+ };
+
+ timer7: timer@40001400 {
+ compatible = "st,stm32-timer";
+ reg = <0x40001400 0x400>;
+ interrupts = <55>;
+ clocks = <&rcc 0 133>;
+ status = "disabled";
+ };
+
+ usart2: serial@40004400 {
+ compatible = "st,stm32-usart", "st,stm32-uart";
+ reg = <0x40004400 0x400>;
+ interrupts = <38>;
+ clocks = <&rcc 0 145>;
+ status = "disabled";
+ };
+
+ usart3: serial@40004800 {
+ compatible = "st,stm32-usart", "st,stm32-uart";
+ reg = <0x40004800 0x400>;
+ interrupts = <39>;
+ clocks = <&rcc 0 146>;
+ status = "disabled";
+ };
+
+ usart4: serial@40004c00 {
+ compatible = "st,stm32-uart";
+ reg = <0x40004c00 0x400>;
+ interrupts = <52>;
+ clocks = <&rcc 0 147>;
+ status = "disabled";
+ };
+
+ usart5: serial@40005000 {
+ compatible = "st,stm32-uart";
+ reg = <0x40005000 0x400>;
+ interrupts = <53>;
+ clocks = <&rcc 0 148>;
+ status = "disabled";
+ };
+
+ usart7: serial@40007800 {
+ compatible = "st,stm32-usart", "st,stm32-uart";
+ reg = <0x40007800 0x400>;
+ interrupts = <82>;
+ clocks = <&rcc 0 158>;
+ status = "disabled";
+ };
+
+ usart8: serial@40007c00 {
+ compatible = "st,stm32-usart", "st,stm32-uart";
+ reg = <0x40007c00 0x400>;
+ interrupts = <83>;
+ clocks = <&rcc 0 159>;
+ status = "disabled";
+ };
+
+ usart1: serial@40011000 {
+ compatible = "st,stm32-usart", "st,stm32-uart";
+ reg = <0x40011000 0x400>;
+ interrupts = <37>;
+ clocks = <&rcc 0 164>;
+ status = "disabled";
+ };
+
+ usart6: serial@40011400 {
+ compatible = "st,stm32-usart", "st,stm32-uart";
+ reg = <0x40011400 0x400>;
+ interrupts = <71>;
+ clocks = <&rcc 0 165>;
+ status = "disabled";
+ };
+
+ rcc: rcc@40023810 {
+ #clock-cells = <2>;
+ compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
+ reg = <0x40023800 0x400>;
+ clocks = <&clk_hse>;
+ };
+
+ rng: rng@50060800 {
+ compatible = "st,stm32-rng";
+ reg = <0x50060800 0x400>;
+ interrupts = <80>;
+ clocks = <&rcc 0 38>;
+ };
+ };
+};
+
+&systick {
+ clocks = <&rcc 1 0>;
+ status = "okay";
+};
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
