[U-Boot] [Patch V2 1/3] armv8: ls1043aqds: fix to get boot device info from FPGA

[Gong Qianyu]

The LBMAP switches on the board will tell which boot device is used.
Only QSPI boot is supported if the boot device is IFCCard.

Signed-off-by: Gong Qianyu <qianyu.g...@nxp.com>
---
 board/freescale/ls1043aqds/ls1043aqds.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/board/freescale/ls1043aqds/ls1043aqds.c 
b/board/freescale/ls1043aqds/ls1043aqds.c
index 7e47ef0..9447c93 100644
--- a/board/freescale/ls1043aqds/ls1043aqds.c
+++ b/board/freescale/ls1043aqds/ls1043aqds.c
@@ -47,7 +47,7 @@ enum {
 int checkboard(void)
 {
        char buf[64];
-#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_QSPI_BOOT)
+#ifndef CONFIG_SD_BOOT
        u8 sw;
 #endif
 
@@ -55,8 +55,6 @@ int checkboard(void)
 
 #ifdef CONFIG_SD_BOOT
        puts("SD\n");
-#elif defined(CONFIG_QSPI_BOOT)
-       puts("QSPI\n");
 #else
        sw = QIXIS_READ(brdcfg[0]);
        sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
@@ -67,8 +65,8 @@ int checkboard(void)
                puts("PromJet\n");
        else if (sw == 0x9)
                puts("NAND\n");
-       else if (sw == 0x15)
-               printf("IFCCard\n");
+       else if (sw == 0xF)
+               printf("QSPI\n");
        else
                printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
 #endif
-- 
2.1.0.27.g96db324

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot