On Fri, Jun 10, 2016 at 8:35 AM, Simon Glass <s...@chromium.org> wrote: > On 8 June 2016 at 06:07, Bin Meng <bmeng...@gmail.com> wrote: >> At present all BayTrail boards configure fsp,emmc-boot-mode to 2, >> which means "eMMC 4.1" per FSP documentation. However, eMMC 4.1 >> only shows up on some early stepping silicon of BayTrail SoC. >> Newer stepping SoC integrates an eMMC 4.5 controller. Intel FSP >> provides a config option fsp,emmc-boot-mode which tells FSP which >> eMMC controller it initializes. Instead of hardcoded to 2, now >> we change it to 1 which means "auto". >> >> With this change, MinnowMax board (with a D0 stepping BayTrail SoC) >> can see the eMMC 4.5 controller at PCI address 00.17.00 via U-Boot >> 'pci' command. >> >> Signed-off-by: Bin Meng <bmeng...@gmail.com> >> --- >> >> arch/x86/dts/bayleybay.dts | 2 +- >> arch/x86/dts/conga-qeval20-qa3-e3845.dts | 2 +- >> arch/x86/dts/minnowmax.dts | 2 +- >> 3 files changed, 3 insertions(+), 3 deletions(-) > > Reviewed-by: Simon Glass <s...@chromium.org>
applied to u-boot-x86, thanks! _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
