Hi Tom, Here is the second sunxi pull-req for v2016.07, it contains a few improvements and fixes, nothing special.
The following changes since commit 6b3943f1b04be60f147ee540fbd72c4c7ea89f80: siemens,am33x: add draco etamin board (2016-06-09 13:53:13 -0400) are available in the git repository at: http://git.denx.de/u-boot-sunxi.git master for you to fetch changes up to 1a83fb4a17d959d7b037999ab7ed7e62429abe34: sunxi: Move the SPL stack top to 0x1A000 on Allwinner A64/A80 (2016-06-10 13:04:06 +0200) ---------------------------------------------------------------- Hans de Goede (3): sunxi: Enable ALDO3 and ALDO4 in Wobo_i5_defconfig sunxi: Add INITIAL_USB_SCAN_DELAY to Mele_A1000G_quad_defconfig sunxi: musb: Properly turn of musb controller before booting Siarhei Siamashka (2): sunxi: Downclock AHB1 to 100MHz on Allwinner A64 sunxi: Move the SPL stack top to 0x1A000 on Allwinner A64/A80 arch/arm/include/asm/arch-sunxi/clock_sun6i.h | 5 +++++ configs/Mele_A1000G_quad_defconfig | 1 + configs/Wobo_i5_defconfig | 2 ++ drivers/usb/musb-new/sunxi.c | 7 +++++++ include/configs/sunxi-common.h | 5 ++--- 5 files changed, 17 insertions(+), 3 deletions(-) Regards, Hans _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
