Hi Marek, On 7 June 2016 at 20:02, Marek Vasut <ma...@denx.de> wrote: > On 06/08/2016 04:43 AM, Simon Glass wrote: >> Hi Marek, > > Hi! > >> On 25 May 2016 at 05:26, Marek Vasut <ma...@denx.de> wrote: >>> On 05/25/2016 05:29 AM, Simon Glass wrote: >>>> Hi Marek, >>>> >>>> On 24 May 2016 at 18:15, Marek Vasut <ma...@denx.de> wrote: >>>>> Both SYS_MALLOC_F and SPL_SYS_MALLOC_SIMPLE are generic config options, >>>>> drop them from the rockchip-specific Kconfig file. >>>>> >>>>> Signed-off-by: Marek Vasut <ma...@denx.de> >>>>> Cc: Tom Rini <tr...@konsulko.com> >>>>> Cc: Simon Glass <s...@chromium.org> >>>>> --- >>>>> arch/arm/mach-rockchip/Kconfig | 6 ------ >>>>> 1 file changed, 6 deletions(-) >>>>> >>>>> diff --git a/arch/arm/mach-rockchip/Kconfig >>>>> b/arch/arm/mach-rockchip/Kconfig >>>>> index d3bddb7..5f6046a 100644 >>>>> --- a/arch/arm/mach-rockchip/Kconfig >>>>> +++ b/arch/arm/mach-rockchip/Kconfig >>>>> @@ -17,12 +17,6 @@ config ROCKCHIP_RK3036 >>>>> and video codec support. Peripherals include Gigabit Ethernet, >>>>> USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs. >>>>> >>>>> -config SYS_MALLOC_F >>>>> - default y >>>>> - >>>>> -config SPL_SYS_MALLOC_SIMPLE >>>>> - default y >>>>> - >>>>> config SPL_DM >>>>> default y >>>>> >>>>> -- >>>>> 2.7.0 >>>>> >>>> >>>> Will these still be enabled some other way? >>> >>> That's why it's RFC, I believe the rockchip platforms would need to add >>> those to their defconfig, right ? >> >> Well, Rockchip boards cannot work without these, which is why they default >> to y. > > I understand that, but these Kconfig options are generic, so they > shouldn't be defined in the mach-rockchip/Kconfig file, but in some > generic Kconfig file and then selected by ARCH_ROCKCHIP symbol or in > some defconfig , right ?
They are not being defined, just their default value is being set. Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
