Dear Kumar Gala, In message <pine.lnx.4.64.0909080919540.2...@localhost.localdomain> you wrote: > The following changes since commit 0052a051f60a043f1730b3a46f23b3c7b0eb7820: > Wolfgang Denk (1): > Merge branch 'master' of git://git.denx.de/u-boot-i2c > > are available in the git repository at: > > git://git.denx.de/u-boot-mpc85xx.git master > > Anton Vorontsov (1): > fsl: sys_eeprom: Fix 'may be used uninitialized' warning > > Dipen Dudhat (2): > ppc/85xx: Use CONFIG_FSL_ESDHC to enable sdhc clk > ppc/85xx: Fix up eSDHC controller clock frequency in the device tree > > Kumar Gala (7): > ppc/8xxx: relocate cpu pointer in global data > ppc/8xxx: Remove ddr_pd_cntl register since it doesn't exist > 85xx: Add support for setting IVORs to fixed offset defaults > ppc/85xx: Add a simple function to search the TLB > ppc/85xx: Fix bug in setup_mp code > ppc/85xx: Cleanup makefile and related optional files > ppc/8xxx: Refactor code to determine if PCI is enabled & agent/host > > Poonam Aggrwal (3): > ppc/85xx,86xx: Handling Unknown SOC version > ppc/85xx/86xx: Device tree fixup for number of cores > ppc/85xx/86xx: Bug fix: call to puts in probecpu() moved to checkcpu(). > > Timur Tabi (1): > fsl: add register read-back to set_law() > > board/atum8548/atum8548.c | 6 +- > board/freescale/common/sys_eeprom.c | 3 +- > board/freescale/mpc8536ds/mpc8536ds.c | 15 +- > board/freescale/mpc8544ds/mpc8544ds.c | 14 +- > board/freescale/mpc8548cds/mpc8548cds.c | 6 +- > board/freescale/mpc8568mds/mpc8568mds.c | 4 +- > board/freescale/mpc8569mds/mpc8569mds.c | 4 +- > board/freescale/mpc8572ds/mpc8572ds.c | 17 +-- > board/freescale/mpc8610hpcd/mpc8610hpcd.c | 12 +- > board/freescale/mpc8641hpcn/mpc8641hpcn.c | 5 +- > board/freescale/p1_p2_rdb/ddr.c | 5 - > board/freescale/p1_p2_rdb/pci.c | 10 +- > board/freescale/p2020ds/p2020ds.c | 14 +- > board/sbc8548/sbc8548.c | 6 +- > board/tqc/tqm85xx/tqm85xx.c | 8 +- > cpu/mpc85xx/Makefile | 23 +++- > cpu/mpc85xx/commproc.c | 3 - > cpu/mpc85xx/cpu.c | 14 +- > cpu/mpc85xx/cpu_init.c | 7 + > cpu/mpc85xx/ddr-gen3.c | 1 - > cpu/mpc85xx/ether_fcc.c | 4 - > cpu/mpc85xx/fdt.c | 9 ++ > cpu/mpc85xx/fixed_ivor.S | 79 ++++++++++ > cpu/mpc85xx/mp.c | 32 ++++- > cpu/mpc85xx/pci.c | 4 +- > cpu/mpc85xx/release.S | 3 + > cpu/mpc85xx/serial_scc.c | 3 - > cpu/mpc85xx/speed.c | 2 +- > cpu/mpc85xx/start.S | 6 + > cpu/mpc85xx/tlb.c | 27 ++++ > cpu/mpc86xx/cpu.c | 11 +- > cpu/mpc86xx/fdt.c | 3 + > cpu/mpc8xxx/Makefile | 2 + > cpu/mpc8xxx/cpu.c | 11 +- > cpu/mpc8xxx/ddr/ctrl_regs.c | 23 --- > cpu/mpc8xxx/fdt.c | 55 +++++++ > cpu/mpc8xxx/pci_cfg.c | 225 > +++++++++++++++++++++++++++++ > drivers/misc/fsl_law.c | 3 +- > include/asm-ppc/fsl_ddr_sdram.h | 1 - > include/asm-ppc/fsl_pci.h | 5 + > include/asm-ppc/immap_85xx.h | 2 +- > include/asm-ppc/mmu.h | 7 +- > include/asm-ppc/processor.h | 14 ++ > lib_ppc/board.c | 4 + > 44 files changed, 568 insertions(+), 144 deletions(-) > create mode 100644 cpu/mpc85xx/fixed_ivor.S > create mode 100644 cpu/mpc8xxx/fdt.c > create mode 100644 cpu/mpc8xxx/pci_cfg.c
Done, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de G's Third Law: In spite of all evidence to the contra- ry, the entire universe is composed of only two basic substances: magic and bullshit. H's Dictum: There is no magic ... _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
