On 05/17/2016 10:56 AM, Michal Simek wrote:
Hi Stephen,
On 17.5.2016 18:50, Stephen Warren wrote:
On 05/17/2016 07:57 AM, Michal Simek wrote:
If timeout happen it should be reported as fault.
Presumably if a timeout occurs, the expected text does not appear, i.e.
the existing assert fails anyway?
Anyway, it's useful to point out problems explicitly, so,
Acked-by: Stephen Warren <swar...@nvidia.com>
Unfortunately I found this issue when I was checking logs where I am
getting this.
ethernet@e000b000 Waiting for PHY auto negotiation to complete.........
TIMEOUT !
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
DHCP client bound to address 192.168.0.107 (882 ms)
Zynq> .Zynq> setenv serverip 192.168.0.105
I haven't looked at the exact reason why it is failing but IMHO it is
worth to check.
Oh, in that case I think I should withdraw my ack; in the log above, the
operation completed successfully, so I'm not convinced the test should
be marked a failure. I thought this change simply provided more detail
re: the cause of a test failure.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
