When multiple PCI cards are present in an ls2080a board, the second card does not get its msi-map set up properly due to a bug in computing the bus number.
The bus number returned by PCI_BDF() is not the actual PCI bus number, but instead represents a global u-boot PCI bus number. A given bus number is relative to hose->first_busno, so that has to be subtracted from the PCI device id. Signed-off-by: Bogdan Purcareata <bogdan.purcare...@nxp.com> Acked-by: Stuart Yoder <stuart.yo...@nxp.com> --- drivers/pci/pcie_layerscape.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/pci/pcie_layerscape.c b/drivers/pci/pcie_layerscape.c index 0ba960e..2e6b986 100644 --- a/drivers/pci/pcie_layerscape.c +++ b/drivers/pci/pcie_layerscape.c @@ -569,7 +569,7 @@ static void fdt_fixup_pcie(void *blob) unsigned char header_type; int index; u32 streamid; - pci_dev_t dev; + pci_dev_t dev, bdf; int bus; unsigned short id; struct pci_controller *hose; @@ -611,12 +611,15 @@ static void fdt_fixup_pcie(void *blob) continue; } + /* the DT fixup must be relative to the hose first_busno */ + bdf = dev - PCI_BDF(hose->first_busno, 0, 0); + /* map PCI b.d.f to streamID in LUT */ - ls_pcie_lut_set_mapping(pcie, index, dev >> 8, + ls_pcie_lut_set_mapping(pcie, index, bdf >> 8, streamid); /* update msi-map in device tree */ - fdt_pcie_set_msi_map_entry(blob, pcie, dev >> 8, + fdt_pcie_set_msi_map_entry(blob, pcie, bdf >> 8, streamid); } } -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot