Removing: uart3_defconfig: Now uart3 can be selected using menuconfig, removing separate config for uart mode. Doing uart boot is not straight forward as ROM uses uart3 as default serial console. In order to boot to prompt, concole in both u-boot and kernel needs to be changed.
qspiboot_defconfig: The only advantage of enabling QSPI_BOOT is selecting env in QSPI. Eventually env needs to be selected by menuconfig so removing qspiboot_defconfig. qspiboot can be done using dra7xx_evm_defconfig. Reviewed-by: Tom Rini <tr...@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvu...@ti.com> --- Changes since v1: - None board/ti/dra7xx/MAINTAINERS | 2 -- configs/dra7xx_evm_qspiboot_defconfig | 43 ---------------------------------- configs/dra7xx_evm_uart3_defconfig | 44 ----------------------------------- 3 files changed, 89 deletions(-) delete mode 100644 configs/dra7xx_evm_qspiboot_defconfig delete mode 100644 configs/dra7xx_evm_uart3_defconfig diff --git a/board/ti/dra7xx/MAINTAINERS b/board/ti/dra7xx/MAINTAINERS index d6efe26..edfbdb7 100644 --- a/board/ti/dra7xx/MAINTAINERS +++ b/board/ti/dra7xx/MAINTAINERS @@ -5,5 +5,3 @@ F: board/ti/dra7xx/ F: include/configs/dra7xx_evm.h F: configs/dra7xx_evm_defconfig F: configs/dra7xx_evm_nodt_defconfig -F: configs/dra7xx_evm_qspiboot_defconfig -F: configs/dra7xx_evm_uart3_defconfig diff --git a/configs/dra7xx_evm_qspiboot_defconfig b/configs/dra7xx_evm_qspiboot_defconfig deleted file mode 100644 index 8ebfe49..0000000 --- a/configs/dra7xx_evm_qspiboot_defconfig +++ /dev/null @@ -1,43 +0,0 @@ -CONFIG_ARM=y -CONFIG_OMAP54XX=y -CONFIG_TARGET_DRA7XX_EVM=y -CONFIG_SPL_STACK_R_ADDR=0x82000000 -CONFIG_SPL=y -CONFIG_SPL_STACK_R=y -CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y -# CONFIG_CMD_IMLS is not set -CONFIG_CMD_ASKENV=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y -CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y -CONFIG_SPI_FLASH=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SYS_NS16550=y -CONFIG_TI_QSPI=y -CONFIG_USB=y -CONFIG_USB_DWC3=y -CONFIG_USB_DWC3_GADGET=y -CONFIG_USB_DWC3_OMAP=y -CONFIG_USB_DWC3_PHY_OMAP=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_G_DNL_MANUFACTURER="Texas Instruments" -CONFIG_G_DNL_VENDOR_NUM=0x0451 -CONFIG_G_DNL_PRODUCT_NUM=0xd022 -CONFIG_OF_LIBFDT=y diff --git a/configs/dra7xx_evm_uart3_defconfig b/configs/dra7xx_evm_uart3_defconfig deleted file mode 100644 index 54c7ba9..0000000 --- a/configs/dra7xx_evm_uart3_defconfig +++ /dev/null @@ -1,44 +0,0 @@ -CONFIG_ARM=y -CONFIG_OMAP54XX=y -CONFIG_TARGET_DRA7XX_EVM=y -CONFIG_CONS_INDEX=3 -CONFIG_SPL_STACK_R_ADDR=0x82000000 -CONFIG_SPL=y -CONFIG_SPL_STACK_R=y -CONFIG_SYS_EXTRA_OPTIONS="SPL_YMODEM_SUPPORT" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y -# CONFIG_CMD_IMLS is not set -CONFIG_CMD_ASKENV=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y -CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y -CONFIG_SPI_FLASH=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SYS_NS16550=y -CONFIG_TI_QSPI=y -CONFIG_USB=y -CONFIG_USB_DWC3=y -CONFIG_USB_DWC3_GADGET=y -CONFIG_USB_DWC3_OMAP=y -CONFIG_USB_DWC3_PHY_OMAP=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_G_DNL_MANUFACTURER="Texas Instruments" -CONFIG_G_DNL_VENDOR_NUM=0x0451 -CONFIG_G_DNL_PRODUCT_NUM=0xd022 -CONFIG_OF_LIBFDT=y -- 2.8.2 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
