now boot linux is OK. mkimage -e /*Entry Point*/ must is /*Load Address + 0x40*/
[u-b...@s3c2440a]# bootm 0x30008000 ## Booting kernel from Legacy Image at 30008000 ... Image Name: linux-2.6.30-5 Created: 2009-09-05 8:17:13 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1513852 Bytes = 1.4 MB Load Address: 30008000 Entry Point: 30008040 Verifying Checksum ... OK XIP Kernel Image ... OK OK Starting kernel ... Uncompressing Linux............................................................................................... done, booting the kernel. Linux version 2.6.30.5 (r...@archlinux) (gcc version 4.3.2 (Sourcery G++ Lite 2008q3-72) ) #1 Sat Sep 5 01:02:52 CST 2009 CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177 CPU: VIVT data cache, VIVT instruction cache Machine: KIBNT_core_board Memory policy: ECC disabled, Data cache writeback CPU S3C2440A (id 0x32440001) S3C24XX Clocks, (c) 2004 Simtec Electronics ....... for dear Wolfgang Denk,thank you for you help >> >> what is wrong with me. >You mean, that you don't have a real name? Hm.. I'm afraid I cannot >answer that. my English is just so so,and I am a newman for using mail list.sorry. >> [u-b...@s3c2440a]# nand read 0x30008000 0x00040000 0x00200000 >> NAND read: device 0 offset 0x40000, size 0x200000 >> 2097152 bytes read: OK >> [u-b...@s3c2440a]# bootm 0x30008000 >> ## Booting kernel from Legacy Image at 30008000 ... >> Image Name: linux-2.6.30-5 >> Created: 2009-09-04 14:22:40 UTC >> Image Type: ARM Linux Kernel Image (uncompressed) >> Data Size: 1958132 Bytes = 1.9 MB >> Load Address: 30008000 >> Entry Point: 30008000 >> Verifying Checksum ... OK >> XIP Kernel Image ... OK >> OK >> Starting kernel ... >> data abort >Meybe you should provide a bit more information, like which versions >of U-Boot and Linux you are using, how exactly you created the Linux >kernel image, etc. I am using U-BOOT 1.3.4 and my linuxOS is archlinux >And you should probably start and get a simple configuration (i. e. >without funny stuff like XIP) running first, before you try such >advanced things. I do not configurate XIP,and I do not know how does it appear at "XIP Kernel Image ... OK" for dear abdoulaye Walsimou Gaye thank you for your help >> what is wrong with me. >> >> [u-b...@s3c2440a]# nand read 0x30008000 0x00040000 0x00200000 >> NAND read: device 0 offset 0x40000, size 0x200000 >> 2097152 bytes read: OK >> >Hello fluke56512, >IIRC board with S3C2440A does not exist in the official versions of u-boot. >Few attempts have been made[1], but without going futher. Or may be you >are working on it? I planed to work on it >with the cheap mini2440 board, but I am too busy for now. mini2440 is not cheap for a student in my country. 2009-09-05 fluke56512
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
