On 05/11/2016 12:30 AM, Prabhakar Kushwaha wrote:
> QorIQ LS1012A Development System (LS1012AQDS) is a high-performance
> development platform, with a complete debugging environment.
> The LS1012AQDS board supports the QorIQ LS1012A processor and is
> optimized to support the high-bandwidth DDR3L memory and
> a full complement of high-speed SerDes ports.
>
> Signed-off-by: Calvin Johnson <calvin.john...@nxp.com>
> Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivast...@nxp.com>
> Signed-off-by: Abhimanyu Saini <abhimanyu.sa...@nxp.com>
> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com>
> ---
> Changes for v2:
> - Added support of qixis over i2c
> - print fpga, board info using qixis
>
> arch/arm/Kconfig | 10 ++
> arch/arm/dts/Makefile | 3 +-
> arch/arm/dts/fsl-ls1012a-qds.dts | 14 ++
> arch/arm/dts/fsl-ls1012a-qds.dtsi | 123 ++++++++++++++
> arch/arm/dts/fsl-ls1012a.dtsi | 119 ++++++++++++++
> board/freescale/ls1012aqds/Kconfig | 15 ++
> board/freescale/ls1012aqds/MAINTAINERS | 6 +
> board/freescale/ls1012aqds/Makefile | 7 +
> board/freescale/ls1012aqds/README | 94 +++++++++++
> board/freescale/ls1012aqds/ls1012aqds.c | 220
> ++++++++++++++++++++++++++
> board/freescale/ls1012aqds/ls1012aqds_qixis.h | 35 ++++
> configs/ls1012aqds_qspi_defconfig | 32 ++++
> include/configs/ls1012a_common.h | 195 +++++++++++++++++++++++
> include/configs/ls1012aqds.h | 150 ++++++++++++++++++
> 14 files changed, 1022 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/dts/fsl-ls1012a-qds.dts
> create mode 100644 arch/arm/dts/fsl-ls1012a-qds.dtsi
> create mode 100644 arch/arm/dts/fsl-ls1012a.dtsi
> create mode 100644 board/freescale/ls1012aqds/Kconfig
> create mode 100644 board/freescale/ls1012aqds/MAINTAINERS
> create mode 100644 board/freescale/ls1012aqds/Makefile
> create mode 100644 board/freescale/ls1012aqds/README
> create mode 100644 board/freescale/ls1012aqds/ls1012aqds.c
> create mode 100644 board/freescale/ls1012aqds/ls1012aqds_qixis.h
> create mode 100644 configs/ls1012aqds_qspi_defconfig
> create mode 100644 include/configs/ls1012a_common.h
> create mode 100644 include/configs/ls1012aqds.h
>
<snip>
> diff --git a/board/freescale/ls1012aqds/MAINTAINERS
> b/board/freescale/ls1012aqds/MAINTAINERS
> new file mode 100644
> index 0000000..3c01df6
> --- /dev/null
> +++ b/board/freescale/ls1012aqds/MAINTAINERS
> @@ -0,0 +1,6 @@
> +LS1012AQDS BOARD
> +M:
> +S: Maintained
> +F: board/freescale/ls1012aqds/
> +F: include/configs/ls1012aqds.h
> +F: configs/ls1012aqds_defconfig
Please add maintainer name.
> diff --git a/board/freescale/ls1012aqds/Makefile
> b/board/freescale/ls1012aqds/Makefile
> new file mode 100644
> index 0000000..0b813f9
> --- /dev/null
> +++ b/board/freescale/ls1012aqds/Makefile
> @@ -0,0 +1,7 @@
> +#
> +# Copyright 2016 Freescale Semiconductor, Inc.
> +#
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +
> +obj-y += ls1012aqds.o
> diff --git a/board/freescale/ls1012aqds/README
> b/board/freescale/ls1012aqds/README
> new file mode 100644
> index 0000000..e94a267
> --- /dev/null
> +++ b/board/freescale/ls1012aqds/README
> @@ -0,0 +1,94 @@
> +Overview
> +--------
> +The LS1012AQDS power supplies (PS) provide all the voltages necessary
> +for the correct operation of the LS1012A processor, DDR3L, QSPI memory,
> +and other onboard peripherals.
Power suppliers? That's all you have?
> +
> +LS1012A SoC Overview
> +--------------------
> +The LS1012A features an advanced 64-bit ARM v8 Cortex-
> +A53 processor, with 32 KB of parity protected L1-I cache,
> +32 KB of ECC protected L1-D cache, as well as 256 KB of
> +ECC protected L2 cache.
> +
> +The LS1012A SoC includes the following function and features:
> + - One 64-bit ARM v8 Cortex-A53 core with the following capabilities:
> + - ARM v8 cryptography extensions
> + - One 16-bit DDR3L SDRAM memory controller, Up to 1.0 GT/s, Supports
> + 16-/8-bit operation (no ECC support)
> + - ARM core-link CCI-400 cache coherent interconnect
> + - Packet Forwarding Engine (PFE)
> + - Cryptography acceleration (SEC)
> + - Ethernet interfaces supported by PFE:
> + - One Configurable x3 SerDes:
> + Two Serdes PLLs supported for usage by any SerDes data lane
> + Support for up to 6 GBaud operation
> + - High-speed peripheral interfaces:
> + - One PCI Express Gen2 controller, supporting x1 operation
> + - One serial ATA (SATA Gen 3.0) controller
> + - One USB 3.0/2.0 controller with integrated PHY
> + - One USB 2.0 controller with ULPI interface. .
> + - Additional peripheral interfaces:
> + - One quad serial peripheral interface (QuadSPI) controller
> + - One serial peripheral interface (SPI) controller
> + - Two enhanced secure digital host controllers
> + - Two I2C controllers
> + - One 16550 compliant DUART (two UART interfaces)
> + - Two general purpose IOs (GPIO)
> + - Two FlexTimers
> + - Five synchronous audio interfaces (SAI)
> + - Pre-boot loader (PBL) provides pre-boot initialization and RCW loading
> + - Single-source clocking solution enabling generation of core, platform,
> + DDR, SerDes, and USB clocks from a single external crystal and internal
> + crystaloscillator
> + - Thermal monitor unit (TMU) with +/- 3C accuracy
> + - Two WatchDog timers
> + - ARM generic timer
> + - QorIQ platform's trust architecture 2.1
> +
> + LS1012AQDS board Overview
> + -----------------------
> + - SERDES Connections, 4 lanes supporting:
> + - PCI Express - 3.0
> + - SGMII, SGMII 2.5
> + - SATA 3.0
> + - DDR Controller
> + - 6-bit, 1 GB DDR3L SDRAM memory, running at data rates up to 1 GT/s
What memory is 6-bit?
> + - QSPI Controller
> + - A dual 1:3 switch, NX3L4357GM,115 (U35) drives the QSPI chip-select
> + signals to QSPI NOR flash memory (2 virtual banks) and the QSPI
> + emulator
> + - USB 3.0
> + - One USB 3.0 controller with integrated PHY
> + - One high-speed USB 3.0 port
> + - USB 2.0
> + - One USB 2.0 controller with ULPI interface
> + - Two enhanced secure digital host controllers:
> + - SDHC1 controller can be connected to onboard SDHC connector
> + - SDHC2 controller: 1-/4-bit SD/MMC card supporting 1.8 V devices
> + - 2 I2C controllers
> + - One SATA onboard connectors
> + - UART
> + - 5 SAI
> + - One SAI port with audio codec SGTL5000:
> + • Provides MIC bias
> + • Provides headphone and line output
> + - One SAI port terminated at 2x6 header
> + - Three SAI Tx/Rx ports terminated at 2x3 headers
> + - ARM JTAG support
> +
> +Booting Options
> +---------------
> +a) QSPI Flash Emu Boot
> +b) QSPI Flash 1
> +c) QSPI Flash 2
> +
> +QSPI flash map
> +--------------
> +Images | Size |QSPI Flash Address
> +------------------------------------------
> +RCW + PBI | 1MB | 0x4000_0000
> +U-boot | 1MB | 0x4010_0000
> +U-boot Env | 1MB | 0x4020_0000
> +PPA FIT image | 2MB | 0x4050_0000
> +Linux ITB | ~53MB | 0x40A0_0000
> diff --git a/board/freescale/ls1012aqds/ls1012aqds.c
> b/board/freescale/ls1012aqds/ls1012aqds.c
> new file mode 100644
> index 0000000..a062c36
> --- /dev/null
> +++ b/board/freescale/ls1012aqds/ls1012aqds.c
> @@ -0,0 +1,220 @@
> +/*
> + * Copyright 2016 Freescale Semiconductor, Inc.
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <i2c.h>
> +#include <fdt_support.h>
> +#include <asm/io.h>
> +#include <asm/arch/clock.h>
> +#include <asm/arch/fsl_serdes.h>
> +#include <asm/arch/fdt.h>
> +#include <asm/arch/soc.h>
> +#include <ahci.h>
> +#include <hwconfig.h>
> +#include <mmc.h>
> +#include <scsi.h>
> +#include <fm_eth.h>
> +#include <fsl_csu.h>
> +#include <fsl_esdhc.h>
> +#include <fsl_mmdc.h>
> +#include <spl.h>
> +#include <netdev.h>
> +
> +#include "../common/qixis.h"
> +#include "ls1012aqds_qixis.h"
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +static void set_wait_for_bits_clear(void *ptr, u32 value, u32 bits)
> +{
> + int timeout = 1000;
> +
> + out_be32(ptr, value);
> +
> + while (in_be32(ptr) & bits) {
> + udelay(100);
> + timeout--;
> + }
> + if (timeout <= 0)
> + puts("Error: wait for clear timeout.\n");
> +}
> +
> +int checkboard(void)
> +{
> + char buf[64];
> + u8 sw;
> +
> + sw = QIXIS_READ(arch);
> + printf("Board Arch: V%d, ", sw >> 4);
> + printf("Board version: %c, boot from ", (sw & 0xf) + 'A' - 1);
> +
> + sw = QIXIS_READ(brdcfg[QIXIS_LBMAP_BRDCFG_REG]);
> +
> + if (sw & QIXIS_LBMAP_ALTBANK)
> + printf("flash: 2\n");
> + else
> + printf("flash: 1\n");
> +
> + printf("FPGA: v%d (%s), build %d",
> + (int)QIXIS_READ(scver), qixis_read_tag(buf),
> + (int)qixis_read_minor());
> +
> + /* the timestamp string contains "\n" at the end */
> + printf(" on %s", qixis_read_time(buf));
> + return 0;
> +}
> +
> +void mmdc_init(void)
> +{
> + struct mmdc_p_regs *mmdc =
> + (struct mmdc_p_regs *)CONFIG_SYS_FSL_DDR_ADDR;
> +
> + /* Set MMDC_MDSCR[CON_REQ] */
> + out_be32(&mmdc->mdscr, 0x00008000);
> +
> + /* configure timing parms */
> + out_be32(&mmdc->mdotc, 0x12554000);
> + out_be32(&mmdc->mdcfg0, 0xbabf7954);
> + out_be32(&mmdc->mdcfg1, 0xff328f64);
> + out_be32(&mmdc->mdcfg2, 0x01ff00db);
> +
> + /* other parms */
> + out_be32(&mmdc->mdmisc, 0x00000680);
> + out_be32(&mmdc->mpmur0, 0x00000800);
> + out_be32(&mmdc->mdrwd, 0x00002000);
> + out_be32(&mmdc->mpodtctrl, 0x0000022a);
> +
> + /* out of reset delays */
> + out_be32(&mmdc->mdor, 0x00bf1023);
> +
> + /* physical parms */
> + out_be32(&mmdc->mdctl, 0x05180000);
> + out_be32(&mmdc->mdasp, 0x0000007f);
> +
> + /* Enable MMDC */
> + out_be32(&mmdc->mdctl, 0x85180000);
> +
> + /* dram init sequence: update MRs */
> + out_be32(&mmdc->mdscr, 0x00088032);
> + out_be32(&mmdc->mdscr, 0x00008033);
> + out_be32(&mmdc->mdscr, 0x00048031);
> + out_be32(&mmdc->mdscr, 0x19308030);
> +
> + /* dram init sequence: ZQCL */
> + out_be32(&mmdc->mdscr, 0x04008040);
> + set_wait_for_bits_clear(&mmdc->mpzqhwctrl, 0xa1390003, 0x00010000);
> +
> + /* Calibrations now: wr lvl */
> + out_be32(&mmdc->mdscr, 0x00848031);
> + out_be32(&mmdc->mdscr, 0x00008200);
> + set_wait_for_bits_clear(&mmdc->mpwlgcr, 0x00000001, 0x00000001);
> +
> + mdelay(1);
> +
> + out_be32(&mmdc->mdscr, 0x00048031);
> + out_be32(&mmdc->mdscr, 0x00008000);
> +
> + mdelay(1);
> +
> + /* Calibrations now: Read DQS gating calibration */
> + out_be32(&mmdc->mdscr, 0x04008050);
> + out_be32(&mmdc->mdscr, 0x00048033);
> + out_be32(&mmdc->mppdcmpr2, 0x00000001);
> + out_be32(&mmdc->mprddlctl, 0x40404040);
> + set_wait_for_bits_clear(&mmdc->mpdgctrl0, 0x10000000, 0x10000000);
> +
> + out_be32(&mmdc->mdscr, 0x00008033);
> +
> + /* Calibrations now: Read calibration */
> + out_be32(&mmdc->mdscr, 0x04008050);
> + out_be32(&mmdc->mdscr, 0x00048033);
> + out_be32(&mmdc->mppdcmpr2, 0x00000001);
> + set_wait_for_bits_clear(&mmdc->mprddlhwctl, 0x00000010, 0x00000010);
> +
> + out_be32(&mmdc->mdscr, 0x00008033);
> +
> + /* PD, SR */
> + out_be32(&mmdc->mdpdc, 0x00030035);
> + out_be32(&mmdc->mapsr, 0x00001067);
> +
> + /* refresh scheme */
> + set_wait_for_bits_clear(&mmdc->mdref, 0x103e8000, 0x00000001);
> +
> + /* disable CON_REQ */
> + out_be32(&mmdc->mdscr, 0x0);
> +}
Put those magic numbers into a header file and use macros. You may reuse this
code someday.
> +
> +int dram_init(void)
> +{
> + mmdc_init();
> +
> + gd->ram_size = 0x40000000;
> +
> + return 0;
> +}
Same here.
> +
> +int board_early_init_f(void)
> +{
> + fsl_lsch2_early_init_f();
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_MISC_INIT_R
> +int misc_init_r(void)
> +{
> + u8 mux_sdhc_cd = 0x80;
> +
> + i2c_set_bus_num(0);
> +
> + i2c_write(CONFIG_SYS_I2C_FPGA_ADDR, 0x5a, 1, &mux_sdhc_cd, 1);
> + return 0;
> +}
> +#endif
> +
> +int board_init(void)
> +{
> + struct ccsr_cci400 *cci = (struct ccsr_cci400 *)
> + CONFIG_SYS_CCI400_ADDR;
> +
> + /* Set CCI-400 control override register to enable barrier
> + * transaction */
> + out_le32(&cci->ctrl_ord,
> + CCI400_CTRLORD_EN_BARRIER);
> +
> +#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
> + enable_layerscape_ns_access();
> +#endif
> +
> +#ifdef CONFIG_ENV_IS_NOWHERE
> + gd->env_addr = (ulong)&default_environment[0];
> +#endif
> + return 0;
> +}
> +
> +int board_eth_init(bd_t *bis)
> +{
> + return pci_eth_init(bis);
> +}
> +
> +#ifdef CONFIG_OF_BOARD_SETUP
> +int ft_board_setup(void *blob, bd_t *bd)
> +{
> + u64 base[CONFIG_NR_DRAM_BANKS];
> + u64 size[CONFIG_NR_DRAM_BANKS];
> +
> + /* fixup DT for the two DDR banks */
> + base[0] = gd->bd->bi_dram[0].start;
> + size[0] = gd->bd->bi_dram[0].size;
> + base[1] = gd->bd->bi_dram[1].start;
> + size[1] = gd->bd->bi_dram[1].size;
> +
> + fdt_fixup_memory_banks(blob, base, size, 2);
> + ft_cpu_setup(blob, bd);
> +
> + return 0;
> +}
> +#endif
> diff --git a/board/freescale/ls1012aqds/ls1012aqds_qixis.h
> b/board/freescale/ls1012aqds/ls1012aqds_qixis.h
> new file mode 100644
> index 0000000..584f604
> --- /dev/null
> +++ b/board/freescale/ls1012aqds/ls1012aqds_qixis.h
> @@ -0,0 +1,35 @@
> +/*
> + * Copyright 2016 Freescale Semiconductor, Inc.
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef __LS1043AQDS_QIXIS_H__
> +#define __LS1043AQDS_QIXIS_H__
> +
> +/* Definitions of QIXIS Registers for LS1043AQDS */
> +
> +/* BRDCFG4[4:7] select EC1 and EC2 as a pair */
> +#define BRDCFG4_EMISEL_MASK 0xe0
> +#define BRDCFG4_EMISEL_SHIFT 5
> +
> +/* SYSCLK */
> +#define QIXIS_SYSCLK_66 0x0
> +#define QIXIS_SYSCLK_83 0x1
> +#define QIXIS_SYSCLK_100 0x2
> +#define QIXIS_SYSCLK_125 0x3
> +#define QIXIS_SYSCLK_133 0x4
> +
> +/* DDRCLK */
> +#define QIXIS_DDRCLK_66 0x0
> +#define QIXIS_DDRCLK_100 0x1
> +#define QIXIS_DDRCLK_125 0x2
> +#define QIXIS_DDRCLK_133 0x3
> +
> +/* BRDCFG2 - SD clock*/
> +#define QIXIS_SDCLK1_100 0x0
> +#define QIXIS_SDCLK1_125 0x1
> +#define QIXIS_SDCLK1_165 0x2
> +#define QIXIS_SDCLK1_100_SP 0x3
> +
> +#endif
> diff --git a/configs/ls1012aqds_qspi_defconfig
> b/configs/ls1012aqds_qspi_defconfig
> new file mode 100644
> index 0000000..2bc178c
> --- /dev/null
> +++ b/configs/ls1012aqds_qspi_defconfig
> @@ -0,0 +1,32 @@
> +CONFIG_ARM=y
> +CONFIG_TARGET_LS1012AQDS=y
> +# CONFIG_SYS_MALLOC_F is not set
> +CONFIG_SPI_FLASH=y
> +CONFIG_DM_SPI=y
> +CONFIG_DM_SPI_FLASH=y
> +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-qds"
> +CONFIG_FIT=y
> +CONFIG_FIT_VERBOSE=y
> +CONFIG_OF_BOARD_SETUP=y
> +CONFIG_OF_STDOUT_VIA_ALIAS=y
> +CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
> +CONFIG_HUSH_PARSER=y
> +CONFIG_CMD_GREPENV=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_I2C=y
> +CONFIG_CMD_USB=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_DHCP=y
> +CONFIG_CMD_MII=y
> +CONFIG_CMD_PING=y
> +CONFIG_CMD_CACHE=y
> +CONFIG_CMD_EXT2=y
> +CONFIG_CMD_FAT=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_DM=y
> +CONFIG_NETDEVICES=y
> +CONFIG_E1000=y
> +CONFIG_SYS_NS16550=y
> +CONFIG_FSL_DSPI=y
> diff --git a/include/configs/ls1012a_common.h
> b/include/configs/ls1012a_common.h
> new file mode 100644
> index 0000000..855fb60
> --- /dev/null
> +++ b/include/configs/ls1012a_common.h
> @@ -0,0 +1,195 @@
> +/*
> + * Copyright (C) 2015 Freescale Semiconductor
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef __LS1012A_COMMON_H
> +#define __LS1012A_COMMON_H
> +
> +#define CONFIG_FSL_LAYERSCAPE
> +#define CONFIG_FSL_LSCH2
> +#define CONFIG_LS1012A
> +#define CONFIG_GICV2
> +
> +#define CONFIG_SYS_HAS_SERDES
> +
> +#include <asm/arch/config.h>
> +#define CONFIG_SYS_NO_FLASH
> +
> +#define CONFIG_SUPPORT_RAW_INITRD
> +
> +#define CONFIG_DISPLAY_BOARDINFO_LATE
> +
> +#define CONFIG_SYS_TEXT_BASE 0x40100000
> +
> +#define CONFIG_SYS_FSL_CLK
> +#define CONFIG_SYS_CLK_FREQ 100000000
> +#define CONFIG_DDR_CLK_FREQ 125000000
Hard-coded value? Are the clocks board-specfic?
> +
> +#define CONFIG_SKIP_LOWLEVEL_INIT
> +#define CONFIG_BOARD_EARLY_INIT_F 1
> +
> +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE +
> 0xfff0)
> +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
> +
> +#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
> +#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
> +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
> +
> +/* Generic Timer Definitions */
> +#define COUNTER_FREQUENCY 25000000 /* 12MHz */
Does this timer has a dedicated clock source? This should be
CONFIG_SYS_CLK_FREQ/4, right? Isn't it also board-specific?
> +
> +/* CSU */
> +#define CONFIG_LAYERSCAPE_NS_ACCESS
> +
> +/* Size of malloc() pool */
> +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
> +
> +/*SPI device */
> +#ifdef CONFIG_QSPI_BOOT
> +#define CONFIG_SYS_QE_FW_IN_SPIFLASH
> +#define CONFIG_SYS_FMAN_FW_ADDR 0x400d0000
> +#define CONFIG_ENV_SPI_BUS 0
> +#define CONFIG_ENV_SPI_CS 0
> +#define CONFIG_ENV_SPI_MAX_HZ 1000000
> +#define CONFIG_ENV_SPI_MODE 0x03
> +#define CONFIG_SPI_FLASH_SPANSION
> +#define CONFIG_FSL_SPI_INTERFACE
> +#define CONFIG_SF_DATAFLASH
> +
> +#define CONFIG_FSL_QSPI
> +#define QSPI0_AMBA_BASE 0x40000000
> +#define CONFIG_SPI_FLASH_SPANSION
> +#define CONFIG_SPI_FLASH_BAR
> +
> +#define FSL_QSPI_FLASH_SIZE (1 << 24)
> +#define FSL_QSPI_FLASH_NUM 2
> +
> +/*
> + * Environment
> + */
> +#define CONFIG_ENV_OVERWRITE
> +
> +#define CONFIG_ENV_IS_IN_SPI_FLASH
> +#define CONFIG_ENV_SIZE 0x40000 /* 256KB */
> +#define CONFIG_ENV_OFFSET 0x200000 /* 2MB */
> +#define CONFIG_ENV_SECT_SIZE 0x40000
> +#endif
> +
> +/* I2C */
> +#define CONFIG_SYS_I2C
> +#define CONFIG_SYS_I2C_MXC
> +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
> +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
> +
> +/* MMC */
> +#define CONFIG_MMC
> +#ifdef CONFIG_MMC
> +#define CONFIG_FSL_ESDHC
> +#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
> +#define CONFIG_GENERIC_MMC
> +#define CONFIG_DOS_PARTITION
> +#endif
> +
> +/* SATA */
> +#define CONFIG_LIBATA
> +#define CONFIG_SCSI_AHCI
> +#define CONFIG_SCSI_AHCI_PLAT
> +#define CONFIG_CMD_SCSI
> +#define CONFIG_DOS_PARTITION
> +#define CONFIG_BOARD_LATE_INIT
> +
> +#define CONFIG_SYS_SATA AHCI_BASE_ADDR
> +
> +#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
> +#define CONFIG_SYS_SCSI_MAX_LUN 1
> +#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
> + CONFIG_SYS_SCSI_MAX_LUN)
> +
> +#define CONFIG_PCI /* Enable PCI/PCIE */
> +#define CONFIG_PCIE1 /* PCIE controller 1 */
> +#define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code
> */
> +#define FSL_PCIE_COMPAT "fsl,ls1043a-pcie"
> +
> +#define CONFIG_SYS_PCI_64BIT
> +
> +#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF 0x00000000
> +#define CONFIG_SYS_PCIE_CFG0_SIZE 0x00001000 /* 4k */
> +#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF 0x00001000
> +#define CONFIG_SYS_PCIE_CFG1_SIZE 0x00001000 /* 4k */
> +
> +#define CONFIG_SYS_PCIE_IO_BUS 0x00000000
> +#define CONFIG_SYS_PCIE_IO_PHYS_OFF 0x00010000
> +#define CONFIG_SYS_PCIE_IO_SIZE 0x00010000 /* 64k */
> +
> +#define CONFIG_SYS_PCIE_MEM_BUS 0x08000000
> +#define CONFIG_SYS_PCIE_MEM_PHYS_OFF 0x04000000
> +#define CONFIG_SYS_PCIE_MEM_SIZE 0x80000000 /* 128M */
> +
> +#define CONFIG_NET_MULTI
> +#define CONFIG_PCI_PNP
> +#define CONFIG_PCI_SCAN_SHOW
> +#define CONFIG_CMD_PCI
> +
> +#define CONFIG_CONS_INDEX 1
> +#define CONFIG_SYS_NS16550_SERIAL
> +#define CONFIG_SYS_NS16550_REG_SIZE 1
> +#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2)
> +
> +#define CONFIG_BAUDRATE 115200
> +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
> +
> +/* Command line configuration */
> +#define CONFIG_CMD_ENV
> +#undef CONFIG_CMD_IMLS
> +
> +
> +#define CONFIG_ARCH_EARLY_INIT_R
> +
> +#define CONFIG_SYS_HZ 1000
> +
> +#define CONFIG_HWCONFIG
> +#define HWCONFIG_BUFFER_SIZE 128
> +
> +#define CONFIG_DISPLAY_CPUINFO
> +
> +/* Initial environment variables */
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> + "initrd_high=0xffffffff\0" \
> + "verify=no\0" \
> + "hwconfig=fsl_ddr:bank_intlv=auto\0" \
> + "loadaddr=0x80100000\0" \
> + "kernel_addr=0x100000\0" \
> + "ramdisk_addr=0x800000\0" \
> + "ramdisk_size=0x2000000\0" \
> + "fdt_high=0xffffffffffffffff\0" \
> + "initrd_high=0xffffffffffffffff\0" \
> + "kernel_start=0xa00000\0" \
> + "kernel_load=0xa0000000\0" \
> + "kernel_size=0x2800000\0" \
> + "console=ttyAMA0,38400n8\0"
> +
> +#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \
> + "earlycon=uart8250,mmio,0x21c0500"
> +#define CONFIG_BOOTCOMMAND "sf probe 0:0; sf read $kernel_load "\
> + "$kernel_start $kernel_size && "\
> + "bootm $kernel_load"
> +#define CONFIG_BOOTDELAY 10
> +
> +/* Monitor Command Prompt */
> +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
> +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
> + sizeof(CONFIG_SYS_PROMPT) + 16)
> +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */
> +#define CONFIG_SYS_LONGHELP
> +#define CONFIG_CMDLINE_EDITING 1
> +#define CONFIG_AUTO_COMPLETE
> +#define CONFIG_SYS_MAXARGS 64 /* max command args */
> +
> +#define CONFIG_PANIC_HANG
> +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
> +
> +#include <asm/fsl_secure_boot.h>
> +
> +#endif /* __LS1012A_COMMON_H */
> diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h
> new file mode 100644
> index 0000000..584a87c
> --- /dev/null
> +++ b/include/configs/ls1012aqds.h
> @@ -0,0 +1,150 @@
> +/*
> + * Copyright 2016 Freescale Semiconductor, Inc.
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef __LS1012AQDS_H__
> +#define __LS1012AQDS_H__
> +
> +#include "ls1012a_common.h"
> +
Shouldn't sysclk/ddrclk be put here?
York
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
