> +
> +#ifdef CONFIG_SERIAL0
> +#define UART_NR S5PC1XX_UART0
> +#elif defined(CONFIG_SERIAL1)
> +#define UART_NR S5PC1XX_UART1
> +#elif defined(CONFIG_SERIAL2)
> +#define UART_NR S5PC1XX_UART2
> +#elif defined(CONFIG_SERIAL3)
> +#define UART_NR S5PC1XX_UART3
> +#else
> +#error "Bad: you didn't configure serial ..."
> +#endif
why not use serial multi API?
> +
> +#define barrier() asm volatile("" : : : "memory")
this is really generic maybe put it somewhere else
> +
> +static inline s5pc1xx_uart_t *s5pc1xx_get_base_uart(enum s5pc1xx_uarts_nr nr)
> +{
> + if (cpu_is_s5pc100())
> + return (s5pc1xx_uart_t *)(S5PC100_PA_UART + (nr * 0x400));
> + else
> + return (s5pc1xx_uart_t *)(S5PC110_PA_UART + (nr * 0x400));
> +}
> +
> +/*
> + * The coefficient, used to calculate the baudrate on S5PC1XX UARTs is
> + * calculated as
> + * C = UBRDIV * 16 + number_of_set_bits_in_UDIVSLOT
> + * however, section 31.6.11 of the datasheet doesn't recomment using 1 for 1,
> + * 3 for 2, ... (2^n - 1) for n, instead, they suggest using these constants:
> + */
> +static const int udivslot[] = {
> + 0,
> + 0x0080,
> + 0x0808,
> + 0x0888,
> + 0x2222,
> + 0x4924,
> + 0x4a52,
> + 0x54aa,
> + 0x5555,
> + 0xd555,
> + 0xd5d5,
> + 0xddd5,
> + 0xdddd,
> + 0xdfdd,
> + 0xdfdf,
> + 0xffdf,
> +};
> +
> +void serial_setbrg(void)
> +{
> + DECLARE_GLOBAL_DATA_PTR;
> + s5pc1xx_uart_t *const uart = s5pc1xx_get_base_uart(UART_NR);
> + u32 pclk = get_pclk();
please use this API
get_pclk_rate() as at91 sh4 and other
> + u32 baudrate = gd->baudrate;
> + int i;
> +
> + i = (pclk / baudrate) % 16;
> +
> + uart->UBRDIV = pclk / baudrate / 16 - 1;
please use accesor writex/readx
> +
> +int restartpowersequence = 0;
> +int atmsecs;
do you use it somewhere else?
I guess no so please make them static
> +
> +void uart_serial_setbrg(unsigned int baudrate, int port)
> +{
> + s5pc1xx_uart_t *const uart = s5pc1xx_get_base_uart(port);
> + u32 pclk = get_pclk();
> + int i;
> +
> + i = (pclk / baudrate) % 16;
> +
> + uart->UBRDIV = pclk / baudrate / 16 - 1;
> + uart->UDIVSLOT = udivslot[i];
> +}
please do not duplidate code
> +
Best Regards,
J.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
