Hi, On 1 May 2016 at 11:35, Simon Glass <s...@chromium.org> wrote: > This series adjusts the block device code to support conversion to driver > model. Specifically > > - A new 'legacy' block interface is created, allowing block devices to be > defined by a linker list and accessed through function calls > - Block device commands (such as sata and scsi) are adjusted to use these > functions rather than the block device array directly > - These same function calls are then implemented by the block uclass > - The existing block-device table in part.c is dropped > - The opportunity is taken to clean up the code style, as block devices are > one of the few remaining dark corners in U-Boot > > It is useful to enable all block device drivers with sandbox. This improves > sandbox code coverage and allows tests to be written. The following are > enabled by this series: > > - IDE > - SCSI > - SATA > - Systemace > > USB was already enabled. MMC will be enabled by a future series. Note that > these devices do not actually function in sandbox, but the code is compiled. > > As mentioned, future work will enable MMC for sandbox including adding > rudimentary sandbox SD card emulation. It would also be possible to create > emulations for IDE, SCSI, SATA and Systemace but that work is not planned. > > It should be noted that the current CONFIG_DM_MMC option does not fully > enable driver model for MMC, since the MMC operations are not running > through driver model. This will need to be addressed at some point. > > This series is available at u-boot-dm/blka-working
I'd like to apply this series in the next few days - please let me know if there are any more comments. Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
