On 04/29/2016 09:58 AM, Diego wrote: > In data venerdì 29 aprile 2016 00:49:22, Marek Vasut ha scritto: >> >> Urgh, so you seem to have third revision of this stick. I have two >> sticks which are exactly the same and work in U-Boot on MX6 wandboard: >> > > Hi Marek, > > how big is the file you're trying to load? > For me it fails for files bigger than 16MB:
Ha ok, I see it now. According to the bus analyzer, the stick Acks long block transfer, but then just times out, I guess because it prepares the data or something. Just a dummy question, did you try reducing USB_MAX_XFER_BLK ? Try with 4096 instead of 65536 , that might work. > U-Boot > usb info > 1: Hub, USB Revision 2.0 > - u-boot EHCI Host Controller > - Class: Hub > - PacketSize: 64 Configurations: 1 > - Vendor: 0x0000 Product 0x0000 Version 1.0 > Configuration: 1 > - Interfaces: 1 Self Powered 0mA > Interface: 0 > - Alternate Setting 0, Endpoints: 1 > - Class Hub > - Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms > > 2: Hub, USB Revision 2.0 > - Class: Hub > - PacketSize: 64 Configurations: 1 > - Vendor: 0x0424 Product 0x2513 Version 11.179 > Configuration: 1 > - Interfaces: 1 Self Powered Remote Wakeup 2mA > Interface: 0 > - Alternate Setting 0, Endpoints: 1 > - Class Hub > - Endpoint 1 In Interrupt MaxPacket 1 Interval 12ms > - Endpoint 1 In Interrupt MaxPacket 1 Interval 12ms > > 3: Mass Storage, USB Revision 2.0 > - Kingston DataTraveler SE9 0019E06B084BFD10470133E8 > - Class: (from Interface) Mass Storage > - PacketSize: 64 Configurations: 1 > - Vendor: 0x0951 Product 0x1689 Version 1.0 > Configuration: 1 > - Interfaces: 1 Bus Powered 100mA > Interface: 0 > - Alternate Setting 0, Endpoints: 2 > - Class Mass Storage, Transp. SCSI, Bulk only > - Endpoint 1 In Bulk MaxPacket 512 > - Endpoint 2 Out Bulk MaxPacket 512 > > U-Boot > load usb 0:1 0x10008000 file1.raw > reading file1.raw > 1048576 bytes read in 59 ms (16.9 MiB/s) > U-Boot > load usb 0:1 0x10008000 file2.raw > reading file2.raw > 2097152 bytes read in 102 ms (19.6 MiB/s) > U-Boot > load usb 0:1 0x10008000 file4.raw > reading file4.raw > 4194304 bytes read in 175 ms (22.9 MiB/s) > U-Boot > load usb 0:1 0x10008000 file6.raw > reading file6.raw > 6291456 bytes read in 255 ms (23.5 MiB/s) > U-Boot > load usb 0:1 0x10008000 file8.raw > reading file8.raw > 8388608 bytes read in 334 ms (24 MiB/s) > U-Boot > load usb 0:1 0x10008000 file10.raw > reading file10.raw > 10485760 bytes read in 408 ms (24.5 MiB/s) > U-Boot > load usb 0:1 0x10008000 file15.raw > reading file15.raw > 15728640 bytes read in 603 ms (24.9 MiB/s) > U-Boot > load usb 0:1 0x10008000 file16.raw > reading file16.raw > EHCI timed out on TD - token=0x90008d80 > EHCI timed out on TD - token=0x10008d80 > EHCI timed out on TD - token=0x10008d80 > Error reading cluster > ** Unable to read file file16.raw ** > U-Boot > load usb 0:1 0x10008000 file20.raw > reading file20.raw > EHCI timed out on TD - token=0xd0008d80 > EHCI timed out on TD - token=0x50008d80 > EHCI timed out on TD - token=0x50008d80 > Error reading cluster > ** Unable to read file file20.raw ** > U-Boot > load usb 0:1 0x10008000 file40.raw > reading file40.raw > EHCI timed out on TD - token=0x1e008d80 > EHCI timed out on TD - token=0x1e008d80 > EHCI timed out on TD - token=0x1e008d80 > Error reading cluster > ** Unable to read file file40.raw ** > U-Boot > > > Bests, > Diego > -- Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
