Hi Marek, On Thu, Apr 28, 2016 at 01:06:07AM +0200, Marek Vasut wrote: >Enable support for booting U-Boot image from filesystem instead of some >random offset on the SD card. This makes the board usable by putting the >u-boot.img to first partition of the SD card and writing the SPL this way: >$ dd if=u-boot-with-spl.imx of=/dev/sdX seek=2 bs=512
I once want to enable this for i.MX6UL, but was rejected. Anyway I prefer load u-boot.img from filesystem. > >Signed-off-by: Marek Vasut <ma...@denx.de> >Cc: Stefano Babic <sba...@denx.de> Acked-by: Peng Fan <van.free...@gmail.com> Regards, Peng. >--- > include/configs/wandboard.h | 2 ++ > 1 file changed, 2 insertions(+) > >diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h >index 99f5c0c..fbce730 100644 >--- a/include/configs/wandboard.h >+++ b/include/configs/wandboard.h >@@ -14,6 +14,8 @@ > > #define CONFIG_SPL_LIBCOMMON_SUPPORT > #define CONFIG_SPL_MMC_SUPPORT >+#define CONFIG_SPL_FAT_SUPPORT >+#define CONFIG_SPL_EXT_SUPPORT > #include "imx6_spl.h" > > #define MACH_TYPE_WANDBOARD 4412 >-- >2.7.0 > >_______________________________________________ >U-Boot mailing list >U-Boot@lists.denx.de >http://lists.denx.de/mailman/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
