Signed-off-by: Mario Six <mario....@gdsys.cc>
---
drivers/gpio/gpio-uclass.c | 30 ++++++++++++++++++++++++++++++
include/asm-generic/gpio.h | 29 +++++++++++++++++++++++++++++
2 files changed, 59 insertions(+)
diff --git a/drivers/gpio/gpio-uclass.c b/drivers/gpio/gpio-uclass.c
index b58d4e6..16b9648 100644
--- a/drivers/gpio/gpio-uclass.c
+++ b/drivers/gpio/gpio-uclass.c
@@ -352,6 +352,36 @@ int dm_gpio_set_value(const struct gpio_desc *desc, int
value)
return 0;
}
+int dm_gpio_get_open_drain(struct gpio_desc *desc)
+{
+ struct dm_gpio_ops *ops = gpio_get_ops(desc->dev);
+ int ret;
+
+ ret = check_reserved(desc, "get_open_drain");
+ if (ret)
+ return ret;
+
+ if (ops->set_open_drain)
+ return ops->get_open_drain(desc->dev, desc->offset);
+ else
+ return 0;
+}
+
+int dm_gpio_set_open_drain(struct gpio_desc *desc, int value)
+{
+ struct dm_gpio_ops *ops = gpio_get_ops(desc->dev);
+ int ret;
+
+ ret = check_reserved(desc, "set_open_drain");
+ if (ret)
+ return ret;
+
+ if (ops->set_open_drain)
+ ops->set_open_drain(desc->dev, desc->offset, value);
+
+ return 0;
+}
+
int dm_gpio_set_dir_flags(struct gpio_desc *desc, ulong flags)
{
struct udevice *dev = desc->dev;
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index 68b5f0b..ba65080 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -241,6 +241,8 @@ struct dm_gpio_ops {
int value);
int (*get_value)(struct udevice *dev, unsigned offset);
int (*set_value)(struct udevice *dev, unsigned offset, int value);
+ int (*get_open_drain)(struct udevice *dev, unsigned offset);
+ int (*set_open_drain)(struct udevice *dev, unsigned offset, int value);
/**
* get_function() Get the GPIO function
*
@@ -541,6 +543,33 @@ int dm_gpio_get_value(const struct gpio_desc *desc);
int dm_gpio_set_value(const struct gpio_desc *desc, int value);
/**
+ * dm_gpio_get_open_drain() - Check if open-drain-mode of a GPIO is active
+ *
+ * This checks if open-drain-mode for a GPIO is enabled or not. This method is
+ * optional; if the driver does not support it, nothing happens when the method
+ * is called.
+ *
+ * @desc: GPIO description containing device, offset and flags,
+ * previously returned by gpio_request_by_name()
+ * @return Value of open drain mode for GPIO (0 for inactive, 1 for active) or
+ * -ve on error
+ */
+int dm_gpio_get_open_drain(struct gpio_desc *desc);
+
+/**
+ * dm_gpio_set_open_drain() - Switch open-drain-mode of a GPIO on or off
+ *
+ * This enables or disables open-drain-mode for a GPIO. This method is
+ * optional; if the driver does not support it, nothing happens when the method
+ * is called.
+ *
+ * @desc: GPIO description containing device, offset and flags,
+ * previously returned by gpio_request_by_name()
+ * @return 0 if OK, -ve on error
+ */
+int dm_gpio_set_open_drain(struct gpio_desc *desc, int value);
+
+/**
* dm_gpio_set_dir() - Set the direction for a GPIO
*
* This sets up the direction according tot the provided flags. It will do
--
2.7.0.GIT
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
