Hi Tom, 2016-04-25 16:44 GMT+02:00 Tom Rini <tr...@konsulko.com>: > In the case of booting from NAND on these boards, remove MMC support > from SPL so that we can continue to fit into the safest partitioning of > the available SRAM. > > Reported-by: Heiko Schocher <h...@denx.de> > Cc: Enric Balletbo i Serra <eballe...@gmail.com> > Signed-off-by: Tom Rini <tr...@konsulko.com> > --- > include/configs/omap3_igep00x0.h | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/include/configs/omap3_igep00x0.h > b/include/configs/omap3_igep00x0.h > index 5e33845..3cdee02 100644 > --- a/include/configs/omap3_igep00x0.h > +++ b/include/configs/omap3_igep00x0.h > @@ -20,6 +20,16 @@ > #include <asm/mach-types.h> > > /* > + * Remove non-NAND boot modes. > + */ > +#ifdef CONFIG_BOOT_NAND > +#undef CONFIG_SPL_LIBDISK_SUPPORT > +#undef CONFIG_SPL_MMC_SUPPORT > +#undef CONFIG_SPL_FAT_SUPPORT > +#undef CONFIG_SPL_EXT_SUPPORT > +#endif > +
Hmm, this will break boot from a sdcard, on IGEP the same SPL binary is used to boot from flash or sdcard. The reason why we have two defconfigs is to select if the board has a ONENAND (igep00xx_defconfig) or a NAND (igep00xx_nand_defconfig) but both must have support for MMC. > +/* > * Display CPU and Board information > */ > #define CONFIG_DISPLAY_CPUINFO 1 > -- > 1.9.1 > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
