Hello,
I have to use interrupts in UBoot 1.3.4 - how could I enable them ?
I have an AT91SAM9G20 - in ist header file I enable CONFIG_USE_IRQ und
uncomment the lines#ifdefc CONFIG_USE_IRQ #error .... #endif.
I inserted the lines:
#define CONFIG_STACKSIZE_IRQ (4*1024)
#define CONFIG_STACKSIZE_FIQ (4*1024)
In the file (/lib_amr/interrupts.c) I have to insert a function called
do_irq().
I inserted:
void do_irq(struct pt_regs* pt_regs)
{
printf("interrupt request\n");
show_regs(pt_regs);
bad_mode();
}
When UBOOT starts all seems to be OK, but if I trigger my interrupt -
the system hangs....nothing is printed on screen anmd I can´t enter
anything in the prompt ?
Could you please help me.... ?
I have to trigger an interrupt if the Reset Pin is low to disable the
SDRAM Controller and perform a soft reset (It´s a bug in the
AT91SAM9G20).
Thanks a lot
Manuel
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
