On 04/21/2016 08:25 AM, Manjunath wrote: > Hello Marek, Hi
> If the USB is detected successfully, then below are the logs. My understanding is that you use u-boot 2013.04, which is about three years old now ? If you observe some problem, please try with mainline first and report back. > U-Boot > usb start > (Re)start USB... > USB0: USB EHCI 1.00 > scanning bus 0 for devices... New Device 0 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 > length 0x40 > set address 1 > usb_control_msg: request: 0x5, requesttype: 0x0, value 0x1 index 0x0 length > 0x0 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 > length 0x12 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 > length 0x9 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 > length 0x19 > get_conf_no 0 Result 25, wLength 25 [...] Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
