Using a separate "u-boot" environment variable allows to easily
specify different filenames for the update procedure. This is also in
line with many other board configurations defining an "update" script.
Signed-off-by: Detlev Zundel <d...@denx.de>
CC: Stefan Roese <s...@denx.de>
---
include/configs/amcc-common.h | 8 +++++---
1 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h
index a2b7ee8..51128a3 100644
--- a/include/configs/amcc-common.h
+++ b/include/configs/amcc-common.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2008
+ * (C) Copyright 2008, 2009
* Stefan Roese, DENX Software Engineering, s...@denx.de.
*
* Common configuration options for all AMCC boards
@@ -271,7 +271,8 @@
"bootm ${kernel_addr_r}\0"
#define CONFIG_AMCC_DEF_ENV_NOR_UPD \
- "load=tftp 200000 " xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \
+ "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \
+ "load=tftp 200000 ${u-boot}\0" \
"update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;"
\
"era " xstr(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;"
\
"cp.b ${fileaddr} " xstr(CONFIG_SYS_MONITOR_BASE) "
${filesize};" \
@@ -279,7 +280,8 @@
"upd=run load update\0" \
#define CONFIG_AMCC_DEF_ENV_NAND_UPD \
- "nload=tftp 200000 " xstr(CONFIG_HOSTNAME) "/u-boot-nand.bin\0" \
+ "u-boot-nand=" xstr(CONFIG_HOSTNAME) "/u-boot-nand.bin\0" \
+ "nload=tftp 200000 ${u-boot-nand}\0" \
"nupdate=nand erase 0 100000;nand write 200000 0 100000;" \
"setenv filesize;saveenv\0" \
"nupd=run nload nupdate\0"
--
1.6.0.6
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
