On 04/18/2016 02:56 PM, Heiko Schocher wrote:
Fix following warnings for all vf6 based boards:

Freescale Vybrid and ls1021xx are different SoCs, may be we can split this patchset.

Apart from that.
Reviewed-by: Bhuvanchandra DV <bhuvanchandra...@toradex.com>

Warning (unit_address_vs_reg): Node 
/soc/ifc@1530000/board-control@3,0/mdio-mux-emi1 has a reg or ranges property, 
but no unit name
Warning (unit_address_vs_reg): Node /soc/aips-bus@40000000 has a unit name, but 
no reg property
Warning (unit_address_vs_reg): Node /soc/aips-bus@40080000 has a unit name, but 
no reg property

Signed-off-by: Heiko Schocher <h...@denx.de>
---
This warnings pop up with the DTC compiler:
$ /tmp/dtc/dtc -v
Version: DTC 1.4.1-gbeef80b8

This fixes the compile warnings for:
https://travis-ci.org/u-boot/u-boot/jobs/122880431

see:
https://travis-ci.org/hsdenx/u-boot/jobs/123238780


Changes in v2:
- added comment from bhuvanchandra...@toradex.com :
   used the changes Stefan Agner posted o LKML:
   https://lkml.org/lkml/2016/4/2/11

  arch/arm/dts/ls1021a-qds.dtsi | 2 +-
  arch/arm/dts/vf.dtsi          | 2 ++
  2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm/dts/ls1021a-qds.dtsi b/arch/arm/dts/ls1021a-qds.dtsi
index ca9e835..4cb6337 100644
--- a/arch/arm/dts/ls1021a-qds.dtsi
+++ b/arch/arm/dts/ls1021a-qds.dtsi
@@ -138,7 +138,7 @@
                device-width = <1>;
                ranges = <0 3 0 0x100>;

-               mdio-mux-emi1 {
+               mdio-mux-emi1@54 {
                        compatible = "mdio-mux-mmioreg";
                        mdio-parent-bus = <&mdio0>;
                        #address-cells = <1>;
diff --git a/arch/arm/dts/vf.dtsi b/arch/arm/dts/vf.dtsi
index 1530d2f..c10c564 100644
--- a/arch/arm/dts/vf.dtsi
+++ b/arch/arm/dts/vf.dtsi
@@ -32,6 +32,7 @@
                        compatible = "fsl,aips-bus", "simple-bus";
                        #address-cells = <1>;
                        #size-cells = <1>;
+                       reg = <0x40000000 0x00070000>;
                        ranges;

                        uart0: serial@40027000 {
@@ -119,6 +120,7 @@
                        compatible = "fsl,aips-bus", "simple-bus";
                        #address-cells = <1>;
                        #size-cells = <1>;
+                       reg = <0x40080000 0x0007f000>;
                        ranges;

                        uart4: serial@400a9000 {


--
Best regards,
Bhuvan
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to