Hi Simon,
On Sunday 10 April 2016 12:05 AM, Simon Glass wrote:
> Hi Lokesh,
>
> On 4 April 2016 at 22:30, Lokesh Vutla <lokeshvu...@ti.com> wrote:
>> This provides a way to load a FIT containing U-Boot and a selection of device
>> tree files from a File system.
>>
>> Signed-off-by: Lokesh Vutla <lokeshvu...@ti.com>
>> ---
>> common/spl/spl_fit.c | 96
>> ++++++++++++++++++++++++++++++++++++++++++++++++++++
>> include/spl.h | 5 +++
>> 2 files changed, 101 insertions(+)
>>
>> diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c
>> index 1a5c027..4c9fe7b 100644
>> --- a/common/spl/spl_fit.c
>> +++ b/common/spl/spl_fit.c
>> @@ -192,3 +192,99 @@ int spl_load_simple_fit(struct spl_load_info *info,
>> ulong sector, void *fit)
>>
>> return 0;
>> }
>> +
>> +int spl_fs_load_simple_fit(struct spl_load_info *info, const char
>> *filename, void *fit)
>> +{
>> + ulong size, load;
>> + unsigned long count;
>> + int node, images;
>> + void *load_ptr;
>> + int fdt_offset, fdt_len;
>> + int data_offset, data_size, file_offset;
>> + int base_offset = 0, align_len;
>> + void *dst;
>> +
>> + /*
>> + * Figure out where the external images start. This is the base for
>> the
>> + * data-offset properties in each image.
>> + */
>> + size = fdt_totalsize(fit);
>> + size = (size + 3) & ~3;
>> + base_offset = (size + 3) & ~3;
>
> Can you please refactor this to share code with spl_load_simple_fit()
> where possible?
Sure.
>
>> +
>> + /*
>> + * Read the entire FIT header, placing it so it finishes before
>> + * where we will load the image. Also the load address is aligned
>> + * ARCH_DMA_MINALIGN.
>> + */
>> + align_len = ARCH_DMA_MINALIGN - 1;
>> + fit = (void *)((CONFIG_SYS_TEXT_BASE - size - align_len) &
>> ~align_len);
>> + debug("FIT header read: destination = 0x%p, size = %lx \n", fit,
>> size);
>> + count = info->fs_read(info, filename, fit, 0, size);
>> + if (count <= 0)
>> + return -EIO;
>> +
>> + /* find the firmware image to load */
>> + images = fdt_path_offset(fit, FIT_IMAGES_PATH);
>> + if (images < 0) {
>> + printf("%s: Cannot find /images node: %d\n", __func__,
>> images);
>> + return -1;
>> + }
>> + node = fdt_first_subnode(fit, images);
>> + if (node < 0) {
>> + printf("%s: Cannot find first image node: %d\n", __func__,
>> node);
>> + return -1;
>> + }
>> +
>> + /* Get its information and set up the spl_image structure */
>> + data_offset = fdt_getprop_u32(fit, node, "data-offset");
>> + data_size = fdt_getprop_u32(fit, node, "data-size");
>> + load = fdt_getprop_u32(fit, node, "load");
>> + debug("data_offset=%x, data_size=%x\n", data_offset, data_size);
>> + spl_image.load_addr = load;
>> + spl_image.entry_point = load;
>> + spl_image.os = IH_OS_U_BOOT;
>> +
>> + /*
>> + * Work out where to place the image. Assuming load addr of
>> u-boot.bin
>> + * is always aligned to ARCH_DMA_MINALIGN. It is possible that file
>> + * offset is not aligned. In order to make sure that the file read is
>> + * dma aligned, align the file offset to dma with extra bytes in the
>> + * beginning. Then do a memcpy of image to dst.
>> + */
>> + data_offset += base_offset;
>> + file_offset = data_offset & ~align_len;
>> + load_ptr = (void *)load;
>> + dst = load_ptr;
>> +
>> + /* Read the image */
>> + debug("Temp u-boot.bin read from fit: dst = 0x%p, file offset =
>> 0x%x, size = 0x%x\n",
>> + dst, file_offset, data_size);
>> + count = info->fs_read(info, filename, dst, file_offset, data_size);
>> + if (count <= 0)
>> + return -EIO;
>> + debug("u-boot.bin load: dst = 0x%p, size = 0x%x\n", dst, data_size);
>> + memcpy(dst, dst + (data_offset & align_len), data_size);
>> +
>> + /* Figure out which device tree the board wants to use */
>> + fdt_len = spl_fit_select_fdt(fit, images, &fdt_offset);
>> + if (fdt_len < 0)
>> + return fdt_len;
>> +
>> + /*
>> + * Read the device tree and place it after the image. Making sure
>> that
>> + * load addr and file offset are aligned to dma.
>> + */
>> + dst = (void *)((load + data_size + align_len) & ~align_len);
>> + fdt_offset += base_offset;
>> + file_offset = fdt_offset & ~align_len;
>> + debug("Temp fdt read from fit: dst = 0x%p, file offset = 0x%x, size
>> = %d\n",
>> + dst, file_offset, data_size);
>> + count = info->fs_read(info, filename, dst, file_offset, data_size);
>> + if (count <= 0)
>> + return -EIO;
>> + debug("fdt load: dst = 0x%p, size = 0x%x\n", load_ptr + data_size,
>> data_size);
>> + memcpy(load_ptr + data_size, dst + (fdt_offset & align_len),
>> data_size);
>> +
>> + return 1;
>> +}
>> diff --git a/include/spl.h b/include/spl.h
>> index de4f70a..276ca12 100644
>> --- a/include/spl.h
>> +++ b/include/spl.h
>> @@ -36,6 +36,7 @@ struct spl_image_info {
>> * @priv: Private data for the device
>> * @bl_len: Block length for reading in bytes
>> * @read: Function to call to read from the device
>> + * @fd_read: Function to call to read from the a fs
>> */
>> struct spl_load_info {
>> void *dev;
>> @@ -43,9 +44,13 @@ struct spl_load_info {
>> int bl_len;
>> ulong (*read)(struct spl_load_info *load, ulong sector, ulong count,
>> void *buf);
>> + int (*fs_read)(struct spl_load_info *load, const char *filename,
>> + void *buf, ulong file_offset, ulong size);
>> };
>>
>> int spl_load_simple_fit(struct spl_load_info *info, ulong sector, void
>> *fdt);
>> +int spl_fs_load_simple_fit(struct spl_load_info *info, const char *filename,
>> + void *fit);
>
> Please add a function comment (which apparently I missed also :-)
Will add it in next version.
Just posted an updated series :)
Thanks and regards,
Lokesh
>
>>
>> #define SPL_COPY_PAYLOAD_ONLY 1
>>
>> --
>> 2.1.4
>>
> Regards,
> Simon
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
