ping Michal Simek wrote: > Hi Ben, > Ben Warren wrote: >> Hi Michal, >> >> mon...@monstr.eu wrote: >>> Hi Ben, >>> >>> I updated LL-temac driver - all fixes are there. >>> Ad to your point Microblaze uses only one ethernet core. It is possible >>> to use a lot of IPs but I don't have board like this to test it that's >>> why I don't want change it. >>> >> If it's possible, somebody will do it. You don't need to have a board >> with more than one to test that it works, just create the data >> structures to encapsulate data that's specific to each instance, such as >> base address etc. Look at the new CS8900 driver or SMC911X for examples >> of how to do this > > If someone do it, then have to change that driver. I understand your opinion > but I don't need it now and it is paid IP core. It need more changes. > There is necessary change FIFO mode and phy handling + more changes in BSP > which generate parameters from HW design. It is necessary to do more complex > changes. > I'll do that changes when phy lib is ready. > > If you can, please add it to your net tree. > > Thanks, > Michal > > > > >>> If you find any other problem please let me know. If is OK - I'll create >>> net branch with these changes (LL_TEMAC/Emaclite + removing old Emac >>> driver) >>> >>> >> You won't need to do that. I'll put it in the main net tree. >>> Thanks, >>> Michal >>> >>> >>> >> regards, >> Ben > >
-- Michal Simek, Ing. (M.Eng) w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/ Microblaze U-BOOT custodian _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
