Add scsi command and enable supporting the pcie2sata chip 88SE9170 from Marvell.
Signed-off-by: Po Liu <po....@nxp.com> --- include/configs/ls1043ardb.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index bc40b06..c8d03f2 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -288,6 +288,22 @@ #define CONFIG_CMD_EXT2 #endif +/* SATA */ +#define CONFIG_LIBATA +#define CONFIG_SCSI_AHCI +#define CONFIG_CMD_SCSI +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 +#define CONFIG_DOS_PARTITION +#define CONFIG_BOARD_LATE_INIT +#define CONFIG_SATA_88SE9170 +#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2 +#define CONFIG_SYS_SCSI_MAX_LUN 2 +#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ + CONFIG_SYS_SCSI_MAX_LUN) + +#define CONFIG_PCI + #include <asm/fsl_secure_boot.h> #endif /* __LS1043ARDB_H__ */ -- 2.1.0.27.g96db324 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
