Support natively revB board. Till now support for revB was done via zcu102 defconfig where device-tree was changed to revB. This patch is adding direct defconfig for RevB.
Signed-off-by: Michal Simek <michal.si...@xilinx.com> --- configs/xilinx_zynqmp_zcu102_revB_defconfig | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 configs/xilinx_zynqmp_zcu102_revB_defconfig diff --git a/configs/xilinx_zynqmp_zcu102_revB_defconfig b/configs/xilinx_zynqmp_zcu102_revB_defconfig new file mode 100644 index 000000000000..542a24a8d5b4 --- /dev/null +++ b/configs/xilinx_zynqmp_zcu102_revB_defconfig @@ -0,0 +1,27 @@ +CONFIG_ARM=y +CONFIG_ARCH_ZYNQMP=y +CONFIG_DM_GPIO=y +CONFIG_TARGET_ZYNQMP_ZCU102=y +CONFIG_ZYNQMP_QSPI=y +CONFIG_ZYNQMP_USB=y +CONFIG_SYS_TEXT_BASE=0x8000000 +CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu102-revB" +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SYS_PROMPT="ZynqMP> " +# CONFIG_CMD_IMLS is not set +CONFIG_CMD_MEMTEST=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_PING=y +CONFIG_CMD_TIME=y +CONFIG_CMD_TIMER=y +CONFIG_OF_EMBED=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM_MMC=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_DM_ETH=y +CONFIG_ZYNQ_GEM=y -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
