+Stephen
Hi Mugunthan,
On 7 April 2016 at 09:17, Mugunthan V N <mugunthan...@ti.com> wrote:
> Size cell and address cell should be read from the parent node
> and should not assume with data structures as an example
> TI DRA7xx SoC is enabled as 64bit as there is LPAE support
> but the addresses specified in DT are all 32 bit sizes. So
> changing the code to read from parent node instead of
> calculations.
I don't understand this. Can you please reword it and shorten the sentences?
>
> Signed-off-by: Mugunthan V N <mugunthan...@ti.com>
> ---
> lib/fdtdec.c | 9 +++++++--
> 1 file changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/lib/fdtdec.c b/lib/fdtdec.c
> index 70acc29..8a5fb8c 100644
> --- a/lib/fdtdec.c
> +++ b/lib/fdtdec.c
> @@ -88,15 +88,20 @@ fdt_addr_t fdtdec_get_addr_size_fixed(const void *blob,
> int node,
> const fdt32_t *prop_addr, *prop_size, *prop_after_size;
> int len;
> fdt_addr_t addr;
> + int parent;
>
> debug("%s: %s: ", __func__, prop_name);
>
> - if (na > (sizeof(fdt_addr_t) / sizeof(fdt32_t))) {
> + parent = fdt_parent_offset(blob, node);
This is a very slow function. I hope this changes is not needed.
> +
> + na = fdt_address_cells(blob, parent);
> + if (na < 1) {
> debug("(na too large for fdt_addr_t type)\n");
> return FDT_ADDR_T_NONE;
> }
>
> - if (ns > (sizeof(fdt_size_t) / sizeof(fdt32_t))) {
> + ns = fdt_size_cells(blob, parent);
> + if (ns < 0) {
> debug("(ns too large for fdt_size_t type)\n");
> return FDT_ADDR_T_NONE;
> }
> --
> 2.8.1.101.g72d917a
>
Regards,
Simon
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
