On Thu, Mar 24, 2016 at 10:15:18PM -0600, Stephen Warren wrote: > This allows U-Boot to known the name of the board. > > The existing rpi_2_defconfig can operate correctly on the Raspberry Pi 3 > in 32-bit mode /if/ you have configured the firmware to use the PL011 UART > as the console UART (the default is the mini UART). This requires two > things: > a) config.txt should contain dtoverlay=pi3-miniuart-bt > b) You should run the following to tell the VC FW to process DT when > booting, and copy u-boot.bin.img (rather than u-boot.bin) to the SD card > as the kernel image: > > path/to/kernel/scripts/mkknlimg --dtok u-boot.bin u-boot.bin.img > > This works as of firmware.git commit 046effa13ebc "firmware: arm_loader: > emmc clock depends on core clock See: > https://github.com/raspberrypi/firmware/issues/572";. > > Signed-off-by: Stephen Warren <swar...@wwwdotorg.org> > Reviewed-by: Tom Rini <tr...@konsulko.com>
Applied to u-boot/master, thanks! -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
