From: Fabio Estevam <fabio.este...@nxp.com>
enable_lvds() function only set bits IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT and
IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT, but these bits were already set
previously inside setup_display().
We can safely remove enable_lvds() then.
Signed-off-by: Fabio Estevam <fabio.este...@nxp.com>
---
board/freescale/mx6sabresd/mx6sabresd.c | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/board/freescale/mx6sabresd/mx6sabresd.c
b/board/freescale/mx6sabresd/mx6sabresd.c
index 727334a..2319354 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -365,22 +365,12 @@ static void do_enable_hdmi(struct display_info_t const
*dev)
imx_enable_hdmi_phy();
}
-static void enable_lvds(struct display_info_t const *dev)
-{
- struct iomuxc *iomux = (struct iomuxc *)
- IOMUXC_BASE_ADDR;
- u32 reg = readl(&iomux->gpr[2]);
- reg |= IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT |
- IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT;
- writel(reg, &iomux->gpr[2]);
-}
-
struct display_info_t const displays[] = {{
.bus = -1,
.addr = 0,
.pixfmt = IPU_PIX_FMT_RGB666,
.detect = NULL,
- .enable = enable_lvds,
+ .enable = NULL,
.mode = {
.name = "Hannstar-XGA",
.refresh = 60,
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
