Hi, On Thu, Mar 24, 2016 at 2:46 PM, Michael Haas <h...@computerlinguist.org> wrote: > > This patch is required to get reliable 1000BASE-T operation on some > boards using the RTL8211C(L) PHY. > > Following discussions on v2 of this patch, I have removed the incorrect > check for the RTL8211C(L). Affected boards now have to define > CONFIG_RTL8211X_PHY_FORCE_MASTER to benefit from the fix. > > Note that this patch requires Karsten Merkers '[PATCH] net: phy: Realtek > RTL8211B/C PHY ID fix' as well as Hans de Goede's recent u-boot-sunxi > pull request, specifically 1eae8f66ff749409eb96e2f3f3387c56232d0b8a and > fc8991c61c393ce6a9d3dfc97cb56dbbd9e8cbba. > > Michael > > > Changes in v3: > - Remove incorrect detection of RTL8211CL and use #ifdef instead > (thanks to Karsten Merker) > - Introduced constants for register bits > > Changes in v2: > - Removed accidental inclusion of Karsten's patch in my first submission of > this series. > - Fix a typo in the code: 6 -> & > > Michael Haas (4): > net: phy: Optionally force master mode for RTL PHY
> net: phy: Force master mode for A20-Olimex-SOM-EVB > net: phy: Force master mode A20-OLinuXino-Lime2 These 2 should probably read: sunxi: A20-Olxxxxxxxxx: Force master mode for RTL8211CL ChenYu > net: phy: Add RTL8211X_PHY_FORCE_MASTER to Kconfig > > configs/A20-OLinuXino-Lime2_defconfig | 1 + > configs/A20-Olimex-SOM-EVB_defconfig | 1 + > drivers/net/Kconfig | 17 +++++++++++++++++ > drivers/net/phy/realtek.c | 13 ++++++++++++- > 4 files changed, 31 insertions(+), 1 deletion(-) > > -- > 2.7.2 > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot