Use spi_write_then_read call from spi layer for
dataflash write and then read calling.
Cc: Bin Meng <bmeng...@gmail.com>
Cc: Simon Glass <s...@chromium.org>
Cc: York Sun <york....@nxp.com>
Signed-off-by: Jagan Teki <jt...@openedev.com>
---
drivers/mtd/spi-nor/sf_dataflash.c | 21 +++++++++++----------
1 file changed, 11 insertions(+), 10 deletions(-)
diff --git a/drivers/mtd/spi-nor/sf_dataflash.c
b/drivers/mtd/spi-nor/sf_dataflash.c
index 722ab7e..525af0a 100644
--- a/drivers/mtd/spi-nor/sf_dataflash.c
+++ b/drivers/mtd/spi-nor/sf_dataflash.c
@@ -84,12 +84,12 @@ struct dataflash {
static inline int dataflash_status(struct spi_slave *spi)
{
int ret;
- u8 status;
+ u8 cmd = OP_READ_STATUS, status;
/*
* NOTE: at45db321c over 25 MHz wants to write
* a dummy byte after the opcode...
*/
- ret = spi_flash_cmd(spi, OP_READ_STATUS, &status, 1);
+ ret = spi_write_then_read(spi, &cmd, 1, NULL, &status, 1);
return ret ? -EIO : status;
}
@@ -171,7 +171,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct
erase_info *instr)
command[0], command[1], command[2], command[3],
pageaddr);
- status = spi_flash_cmd_write(spi, command, 4, NULL, 0);
+ status = spi_write_then_read(spi, command, 4, NULL, NULL, 0);
if (status < 0) {
debug("%s: erase send command error!\n", mtd->name);
return -EIO;
@@ -247,7 +247,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t
from, size_t len,
command[3] = (uint8_t)(addr >> 0);
/* plus 4 "don't care" bytes, command len: 4 + 4 "don't care" bytes */
- status = spi_flash_cmd_read(spi, command, 8, buf, len);
+ status = spi_write_then_read(spi, command, 8, NULL, buf, len);
if (status >= 0) {
*retlen = len - 8;
status = 0;
@@ -327,7 +327,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to,
size_t len,
debug("TRANSFER: (%x) %x %x %x\n",
command[0], command[1], command[2], command[3]);
- status = spi_flash_cmd_write(spi, command, 4, NULL, 0);
+ status = spi_write_then_read(spi, command, 4, NULL,
NULL, 0);
if (status < 0) {
debug("%s: write(<pagesize) command error!\n",
mtd->name);
@@ -352,8 +352,8 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to,
size_t len,
debug("PROGRAM: (%x) %x %x %x\n",
command[0], command[1], command[2], command[3]);
- status = spi_flash_cmd_write(spi, command,
- 4, writebuf, writelen);
+ status = spi_write_then_read(spi, command, 4,
+ writebuf, NULL, writelen);
if (status < 0) {
debug("%s: write send command error!\n", mtd->name);
return -EIO;
@@ -376,8 +376,8 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to,
size_t len,
debug("COMPARE: (%x) %x %x %x\n",
command[0], command[1], command[2], command[3]);
- status = spi_flash_cmd_write(spi, command,
- 4, writebuf, writelen);
+ status = spi_write_then_read(spi, command, 4,
+ writebuf, NULL, writelen);
if (status < 0) {
debug("%s: write(compare) send command error!\n",
mtd->name);
@@ -519,6 +519,7 @@ static struct flash_info *jedec_probe(struct spi_slave *spi)
uint8_t id[5];
uint32_t jedec;
struct flash_info *info;
+ u8 cmd = CMD_READ_ID;
int status;
/*
@@ -530,7 +531,7 @@ static struct flash_info *jedec_probe(struct spi_slave *spi)
* That's not an error; only rev C and newer chips handle it, and
* only Atmel sells these chips.
*/
- tmp = spi_flash_cmd(spi, CMD_READ_ID, id, sizeof(id));
+ tmp = spi_write_then_read(spi, &cmd, 1, NULL, id, sizeof(id));
if (tmp < 0) {
printf("dataflash: error %d reading JEDEC ID\n", tmp);
return ERR_PTR(tmp);
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
