Since spi_read_then_write moved into spi layer,
the meaning of data transfer is also change from
read_then_write to write_then_read, this means
first spi will write the opcode through and then
read the respective buffer.
Cc: Simon Glass <s...@chromium.org>
Cc: Bin Meng <bmeng...@gmail.com>
Cc: Mugunthan V N <mugunthan...@ti.com>
Cc: Michal Simek <michal.si...@xilinx.com>
Cc: Siva Durga Prasad Paladugu <siva...@xilinx.com>
Signed-off-by: Jagan Teki <jt...@openedev.com>
---
drivers/mtd/spi-nor/m25p80.c | 8 ++++----
drivers/spi/spi-uclass.c | 19 +++++++++----------
drivers/spi/spi.c | 19 +++++++++----------
include/spi.h | 23 +++++++++++++++++++----
4 files changed, 41 insertions(+), 28 deletions(-)
diff --git a/drivers/mtd/spi-nor/m25p80.c b/drivers/mtd/spi-nor/m25p80.c
index 6033b48..429d710 100644
--- a/drivers/mtd/spi-nor/m25p80.c
+++ b/drivers/mtd/spi-nor/m25p80.c
@@ -40,7 +40,7 @@ static int m25p80_read_reg(struct spi_nor *nor, u8 cmd, u8
*val, int len)
if (nor->flags & SNOR_F_U_PAGE)
spi->flags |= SPI_XFER_U_PAGE;
- ret = spi_read_then_write(spi, &cmd, 1, NULL, val, len);
+ ret = spi_write_then_read(spi, &cmd, 1, NULL, val, len);
if (ret < 0) {
debug("m25p80: error %d reading register %x\n", ret, cmd);
return ret;
@@ -66,7 +66,7 @@ static int m25p80_write_reg(struct spi_nor *nor, u8 cmd, u8
*buf, int len)
if (nor->flags & SNOR_F_U_PAGE)
spi->flags |= SPI_XFER_U_PAGE;
- ret = spi_read_then_write(spi, &cmd, 1, buf, NULL, len);
+ ret = spi_write_then_read(spi, &cmd, 1, buf, NULL, len);
if (ret < 0) {
debug("m25p80: error %d writing register %x\n", ret, cmd);
return ret;
@@ -128,7 +128,7 @@ static int m25p80_read(struct spi_nor *nor, const u8 *cmd,
size_t cmd_len,
if (nor->flags & SNOR_F_U_PAGE)
spi->flags |= SPI_XFER_U_PAGE;
- ret = spi_read_then_write(spi, cmd, cmd_len, NULL, data, data_len);
+ ret = spi_write_then_read(spi, cmd, cmd_len, NULL, data, data_len);
if (ret < 0) {
debug("m25p80: error %d reading %x\n", ret, *cmd);
return ret;
@@ -155,7 +155,7 @@ static int m25p80_write(struct spi_nor *nor, const u8 *cmd,
size_t cmd_len,
if (nor->flags & SNOR_F_U_PAGE)
spi->flags |= SPI_XFER_U_PAGE;
- ret = spi_read_then_write(spi, cmd, cmd_len, data, NULL, data_len);
+ ret = spi_write_then_read(spi, cmd, cmd_len, data, NULL, data_len);
if (ret < 0) {
debug("m25p80: error %d writing %x\n", ret, *cmd);
return ret;
diff --git a/drivers/spi/spi-uclass.c b/drivers/spi/spi-uclass.c
index 2cf2a52..7ef2496 100644
--- a/drivers/spi/spi-uclass.c
+++ b/drivers/spi/spi-uclass.c
@@ -95,26 +95,25 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
return spi_get_ops(bus)->xfer(dev, bitlen, dout, din, flags);
}
-int spi_read_then_write(struct spi_slave *spi, const u8 *cmd,
- size_t cmd_len, const u8 *data_out,
- u8 *data_in, size_t data_len)
+int spi_write_then_read(struct spi_slave *slave, const u8 *opcode,
+ size_t n_opcode, const u8 *txbuf, u8 *rxbuf,
+ size_t n_buf)
{
unsigned long flags = SPI_XFER_BEGIN;
int ret;
- if (data_len == 0)
+ if (n_buf == 0)
flags |= SPI_XFER_END;
- ret = spi_xfer(spi, cmd_len * 8, cmd, NULL, flags);
+ ret = spi_xfer(slave, n_opcode * 8, opcode, NULL, flags);
if (ret) {
debug("spi: failed to send command (%zu bytes): %d\n",
- cmd_len, ret);
- } else if (data_len != 0) {
- ret = spi_xfer(spi, data_len * 8, data_out, data_in,
- SPI_XFER_END);
+ n_opcode, ret);
+ } else if (n_buf != 0) {
+ ret = spi_xfer(slave, n_buf * 8, txbuf, rxbuf, SPI_XFER_END);
if (ret)
debug("spi: failed to transfer %zu bytes of data: %d\n",
- data_len, ret);
+ n_buf, ret);
}
return ret;
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index aceaf9b..80aba57 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -45,26 +45,25 @@ int __weak spi_xfer(struct spi_slave *slave, unsigned int
bitlen,
return 0;
}
-int spi_read_then_write(struct spi_slave *spi, const u8 *cmd,
- size_t cmd_len, const u8 *data_out,
- u8 *data_in, size_t data_len)
+int spi_write_then_read(struct spi_slave *slave, const u8 *opcode,
+ size_t n_opcode, const u8 *txbuf, u8 *rxbuf,
+ size_t n_buf)
{
unsigned long flags = SPI_XFER_BEGIN;
int ret;
- if (data_len == 0)
+ if (n_buf == 0)
flags |= SPI_XFER_END;
- ret = spi_xfer(spi, cmd_len * 8, cmd, NULL, flags);
+ ret = spi_xfer(slave, n_opcode * 8, opcode, NULL, flags);
if (ret) {
debug("spi: failed to send command (%zu bytes): %d\n",
- cmd_len, ret);
- } else if (data_len != 0) {
- ret = spi_xfer(spi, data_len * 8, data_out, data_in,
- SPI_XFER_END);
+ n_opcode, ret);
+ } else if (n_buf != 0) {
+ ret = spi_xfer(slave, n_buf * 8, txbuf, rxbuf, SPI_XFER_END);
if (ret)
debug("spi: failed to transfer %zu bytes of data: %d\n",
- data_len, ret);
+ n_buf, ret);
}
return ret;
diff --git a/include/spi.h b/include/spi.h
index 139292c..dd0b11b 100644
--- a/include/spi.h
+++ b/include/spi.h
@@ -265,10 +265,25 @@ int spi_set_wordlen(struct spi_slave *slave, unsigned int
wordlen);
int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
void *din, unsigned long flags);
-/* spi_write_then_read - SPI synchronous read followed by write */
-int spi_read_then_write(struct spi_slave *spi, const u8 *cmd,
- size_t cmd_len, const u8 *data_out,
- u8 *data_in, size_t data_len);
+/**
+ * spi_write_then_read - SPI synchronous write followed by read
+ *
+ * This performs a half duplex transaction in which the first transaction
+ * is to send the opcode and if the length of buf is non-zero then it start
+ * the second transaction as tx or rx based on the need from respective slave.
+ *
+ * @slave: slave device with which opcode/data will be exchanged
+ * @opcode: opcode used for specific transfer
+ * @n_opcode: size of opcode, in bytes
+ * @txbuf: buffer into which data to be written
+ * @rxbuf: buffer into which data will be read
+ * @n_buf: size of buf (whether it's [tx|rx]buf), in bytes
+ *
+ * Returns: 0 on success, not 0 on failure
+ */
+int spi_write_then_read(struct spi_slave *slave, const u8 *opcode,
+ size_t n_opcode, const u8 *txbuf, u8 *rxbuf,
+ size_t n_buf);
/* Copy memory mapped data */
void spi_flash_copy_mmap(void *data, void *offset, size_t len);
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
