Introduce driver to support "fairchild,74hc595" devices.
1. Take linux drivers/drivers/gpio/gpio-74x164.c as reference.
2. Following the naming used in Linux driver with gen_7x164 as the prefix.
3. Enable CONFIG_DM_74X164 to use this driver.
4. Follow Documentation/devicetree/bindings/gpio/gpio-74x164.txt to add device
nodes
5. Tested on i.MX6 UltraLite with 74LV595 using gpio command and oscillograph.
Signed-off-by: Peng Fan <van.free...@gmail.com>
Cc: Simon Glass <s...@chromium.org>
Cc: Masahiro Yamada <yamada.masah...@socionext.com>
Cc: Chin Liang See <cl...@altera.com>
Cc: Bhuvanchandra DV <bhuvanchandra...@toradex.com>
Cc: Daniel Schwierzeck <daniel.schwierz...@gmail.com>
Cc: Fabio Estevam <fabio.este...@nxp.com>
Cc: Stefano Babic <sba...@denx.de>
---
drivers/gpio/74x164_gpio.c | 220 +++++++++++++++++++++++++++++++++++++++++++++
drivers/gpio/Kconfig | 8 ++
drivers/gpio/Makefile | 1 +
3 files changed, 229 insertions(+)
create mode 100644 drivers/gpio/74x164_gpio.c
diff --git a/drivers/gpio/74x164_gpio.c b/drivers/gpio/74x164_gpio.c
new file mode 100644
index 0000000..5d12a9a
--- /dev/null
+++ b/drivers/gpio/74x164_gpio.c
@@ -0,0 +1,220 @@
+/*
+ * Take drivers/gpio/gpio-74x164.c as reference.
+ *
+ * 74Hx164 - Generic serial-in/parallel-out 8-bits shift register GPIO driver
+ *
+ * Copyright (C) 2016 Peng Fan <van.free...@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <dm.h>
+#include <fdtdec.h>
+#include <malloc.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <spi.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * struct gen_74x164_chip - Data for 74Hx164
+ *
+ * @dev: udevice structure for the device
+ * @slave: spi slave
+ * @oe: OE pin
+ * @nregs: number of registers
+ * @buffer: buffer for chained chips
+ */
+#define GEN_74X164_NUMBER_GPIOS 8
+
+struct gen_74x164_info {
+ struct udevice *dev;
+ struct spi_slave *slave;
+ struct gpio_desc oe;
+ u32 nregs;
+ /*
+ * Since the nregs are chained, every byte sent will make
+ * the previous byte shift to the next register in the
+ * chain. Thus, the first byte sent will end up in the last
+ * register at the end of the transfer. So, to have a logical
+ * numbering, store the bytes in reverse order.
+ */
+ u8 *buffer;
+};
+
+static int gen_74x164_write_conf(struct udevice *dev)
+{
+ struct gen_74x164_info *info = dev_get_platdata(dev);
+ struct spi_slave *slave = info->slave;
+ int ret;
+
+ ret = spi_claim_bus(slave);
+ if (ret)
+ return ret;
+
+ ret = spi_xfer(slave, info->nregs * 8, info->buffer, NULL,
+ SPI_XFER_BEGIN | SPI_XFER_END);
+
+ spi_release_bus(slave);
+
+ return ret;
+}
+
+static int gen_74x164_get_value(struct udevice *dev, unsigned offset)
+{
+ struct gen_74x164_info *info = dev_get_platdata(dev);
+ u8 bank = info->nregs - 1 - offset / 8;
+ u8 pin = offset % 8;
+
+ return (info->buffer[bank] >> pin) & 0x1;
+}
+
+static int gen_74x164_set_value(struct udevice *dev, unsigned offset,
+ int value)
+{
+ struct gen_74x164_info *info = dev_get_platdata(dev);
+ u8 bank = info->nregs - 1 - offset / 8;
+ u8 pin = offset % 8;
+ int ret;
+
+ if (value)
+ info->buffer[bank] |= 1 << pin;
+ else
+ info->buffer[bank] &= ~(1 << pin);
+
+ ret = gen_74x164_write_conf(dev);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int gen_74x164_direction_input(struct udevice *dev, unsigned offset)
+{
+ return -EINVAL;
+}
+
+static int gen_74x164_direction_output(struct udevice *dev, unsigned offset,
+ int value)
+{
+ return gen_74x164_set_value(dev, offset, value);
+}
+
+static int gen_74x164_get_function(struct udevice *dev, unsigned offset)
+{
+ return GPIOF_OUTPUT;
+}
+
+static int gen_74x164_xlate(struct udevice *dev, struct gpio_desc *desc,
+ struct fdtdec_phandle_args *args)
+{
+ desc->offset = args->args[0];
+ desc->flags = args->args[1] & GPIO_ACTIVE_LOW ? GPIOD_ACTIVE_LOW : 0;
+
+ return 0;
+}
+
+static const struct dm_gpio_ops gen_74x164_ops = {
+ .direction_input = gen_74x164_direction_input,
+ .direction_output = gen_74x164_direction_output,
+ .get_value = gen_74x164_get_value,
+ .set_value = gen_74x164_set_value,
+ .get_function = gen_74x164_get_function,
+ .xlate = gen_74x164_xlate,
+};
+
+static int gen_74x164_probe(struct udevice *dev)
+{
+ struct gen_74x164_info *info = dev_get_platdata(dev);
+ struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+ char *str, *str1;
+ int ret;
+ const void *fdt = gd->fdt_blob;
+ int node = dev->of_offset;
+ struct udevice *bus;
+ int busnum;
+ char name[30];
+
+ str = strdup(dev->name);
+ if (!str)
+ return -ENOMEM;
+
+ info->nregs = fdtdec_get_int(fdt, node, "registers-number", 1);
+ info->buffer = calloc(info->nregs, sizeof(u8));
+ if (!info->buffer) {
+ ret = -ENOMEM;
+ goto free_str;
+ }
+
+ ret = fdtdec_get_byte_array(fdt, node, "registers-default",
+ info->buffer, info->nregs);
+ if (ret)
+ dev_dbg(dev, "No registers-default property\n");
+
+ ret = gpio_request_by_name(dev, "oe-gpios", 0, &info->oe,
+ GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
+ if (ret) {
+ dev_err(dev, "No oe-pins property\n");
+ goto free_buf;
+ }
+
+ /* output enable */
+ ret = dm_gpio_set_value(&info->oe, 0);
+ if (ret) {
+ dev_err(dev, "Set oe-pins value failure\n");
+ goto free_buf;
+ }
+
+ uc_priv->bank_name = str;
+ uc_priv->gpio_count = info->nregs * 8;
+
+ bus = dev_get_parent(dev);
+ busnum = bus->seq;
+
+ snprintf(name, sizeof(name), "generic_%d:%d", busnum, 0);
+ str1 = strdup(name);
+ if (!str1) {
+ ret = -ENOMEM;
+ goto free_buf;
+ }
+
+ ret = spi_get_bus_and_cs(busnum, 0, 1000000, SPI_MODE_0,
+ "spi_generic_drv", str, &bus, &info->slave);
+ if (ret)
+ goto free_str1;
+
+ ret = gen_74x164_write_conf(dev);
+ if (ret)
+ goto free_str1;
+
+ dev_dbg(dev, "%s is ready\n", dev->name);
+
+ return 0;
+
+free_str1:
+ free(str1);
+free_buf:
+ free(info->buffer);
+free_str:
+ free(str);
+ return ret;
+}
+
+static const struct udevice_id gen_74x164_ids[] = {
+ { .compatible = "fairchild,74hc595" },
+ { }
+};
+
+U_BOOT_DRIVER(74x164) = {
+ .name = "74x164",
+ .id = UCLASS_GPIO,
+ .ops = &gen_74x164_ops,
+ .probe = gen_74x164_probe,
+ .platdata_auto_alloc_size = sizeof(struct gen_74x164_info),
+ .of_match = gen_74x164_ids,
+};
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 51658f1..43fc9c4 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -96,6 +96,14 @@ config PIC32_GPIO
help
Say yes here to support Microchip PIC32 GPIOs.
+config DM_74X164
+ bool "74x164 serial-in/parallel-out 8-bits shift register"
+ depends on DM_GPIO
+ help
+ Driver for 74x164 compatible serial-in/parallel-out 8-outputs
+ shift registers. This driver can be used to provide access
+ to more gpio outputs.
+
config DM_PCA953X
bool "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports"
depends on DM_GPIO
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index bfc67d2..393b148 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -12,6 +12,7 @@ endif
obj-$(CONFIG_DM_GPIO) += gpio-uclass.o
obj-$(CONFIG_DM_PCA953X) += pca953x_gpio.o
+obj-$(CONFIG_DM_74X164) += 74x164_gpio.o
obj-$(CONFIG_AT91_GPIO) += at91_gpio.o
obj-$(CONFIG_ATMEL_PIO4) += atmel_pio4.o
--
2.6.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
