On 16 March 2016 at 09:14, Qianyu Gong <qianyu.g...@nxp.com> wrote: > >> -----Original Message----- >> From: Jagan Teki [mailto:jagannadh.t...@gmail.com] >> Sent: Tuesday, March 15, 2016 7:18 PM >> To: Qianyu Gong <qianyu.g...@nxp.com>; Huan Wang <alison.w...@nxp.com> >> Cc: york sun <york....@nxp.com>; Tom Rini <tr...@konsulko.com>; Siva Durga >> Prasad Paladugu <siva...@xilinx.com>; Michal Simek <michal.si...@xilinx.com>; >> u-boot@lists.denx.de; Stefan Roese <s...@denx.de>; Mingkai Hu >> <mingkai...@nxp.com> >> Subject: Re: [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support >> >> On 9 March 2016 at 13:37, Qianyu Gong <qianyu.g...@nxp.com> wrote: >> > Hi Jagan, >> > >> >> -----Original Message----- >> >> From: york sun >> >> Sent: Tuesday, March 08, 2016 12:46 AM >> >> To: Jagan Teki <jt...@openedev.com>; Huan Wang <alison.w...@nxp.com>; >> >> Qianyu Gong <qianyu.g...@nxp.com> >> >> Cc: u-boot@lists.denx.de; Siva Durga Prasad Paladugu >> >> <siva...@xilinx.com>; Stefan Roese <s...@denx.de>; Michal Simek >> >> <michal.si...@xilinx.com>; Tom Rini <tr...@konsulko.com> >> >> Subject: Re: [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support >> >> >> >> On 03/03/2016 01:06 PM, york sun wrote: >> >> > On 02/29/2016 04:26 AM, Jagan Teki wrote: >> >> >> Hi York, >> >> >> >> >> >> On 27 February 2016 at 02:14, york sun <york....@nxp.com> wrote: >> >> >>> On 02/22/2016 10:18 AM, Jagan Teki wrote: >> >> >> >> <snip> >> >> >> >> >>>> >> >> >>>> Can you pls- test the dataflash changes? use u-boot-spi/spi-nor >> >> >>>> >> >> >>> Jagan, >> >> >>> >> >> >>> I am getting there. Will test sf probe/read/write and probably >> >> >>> boot on selected platforms. Is there any specific platform/test in >> >> >>> your mind? >> >> >> >> >> >> Yes, these tests OK. and if possible please verify 'sf protect' as >> >> >> well. >> >> >> >> >> > >> >> > Jagan, >> >> > >> >> > Sorry for the delay. I am having issue with both ls1021aqds and >> >> > ls1043aqds. Need to work with internal team to sort it out. >> >> > >> >> > My understanding the tests you need are for spi-nor, in my case, >> >> > fsl-qspi, right? This is not for fsl-dspi or fsl-espi driver. I >> >> > only have ls1021aqds and ls1043aqds with such support. >> >> > >> >> >> >> Jagan, >> >> >> >> Alison and Qianyu have tested on LS1021AQDS and LS1043AQDS. There >> >> were some issues. They will post their findings (and possible fix) to >> >> this thread. >> >> >> >> York >> > >> > I tested on LS1043AQDS board based on your spi-nor branch. The >> 'spi_flash_probe' >> > failed during QSPI boot. Then I found that CONFIG_DM_MTD_SPI_NOR is >> > not defined for the board but it could be selected if CONFIG_MTD && >> CONFIG_DM_SPI, correct? >> > >> > So after I moved CONFIG_MTD to the defconfig file, the probing could work >> > now. >> > >> > And there is another small effect on our Fman driver. It would like to >> > read ucode blob from the QSPI flash. As the 'spi_flash_read' interface >> > is changed, I've modified the address value to an offset value in flash. >> >> Qianyu, >> >> > Here are my patches: >> > http://patchwork.ozlabs.org/patch/594872/ >> > http://patchwork.ozlabs.org/patch/594873/ >> > http://patchwork.ozlabs.org/patch/594874/ >> >> I have applied 3rd patch on my test branch, and remaining two will go in >> another >> time like once spi-nor got merged. >> >> Qianyu/Alison Wang, >> >> Please test this[1] branch for your new changes and let me know for any >> issues. >> >> [1] >> http://git.denx.de/?p=u-boot/u-boot-spi.git;a=shortlog;h=refs/heads/spi-nor- >> next >> >> -- >> Jagan. > > Hi Jagan, > > Both DSPI and QSPI work well on LS1043ARDB/LS1043AQDS board. > Thanks!
thanks! Mugunthan/Alison Wang, Please use u-boot-spi/spi-nor-test for your testing. -- Jagan. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot